MANUAL AND DETACHABLE STAND-UP PADDLE PUMP, UP TO 29 PSI SUPER
Store Availability
Store availability
BENEFITS
Ease of use
Two progressive modes of operation: 1/ high volume 2/ high pressure
Parameter measurement
Built-in 3-29 PSI pressure gauge. Starts working once the SUP takes shape (3psi)
TECHNICAL INFORMATIONS
SUP inflation tips
1/ Stand on flat and stable ground.
2/ Screw the hose onto the pump.
3/ Connect the hose to the SUP (valve raised).
4/ Close the cap on the body of the pump, its double action operation and delivers 3.6 L with each up and down stroke.
5/ Inflate the stand-up paddle board until it takes shape.
6/ As soon as pumping becomes difficult, open the cap, the pump then operates in single action (1.8 L with each down stroke).
7/ Inflate to the SUP's recommended pressure.
Storage tips
Roll up the hose, do not fold it.
Store the pump body and hose flat in the SUP bag.
Do not stand on the pump or the hose.
Clean off any sand, it can damage the seals.
Restrictions
Roll up the hose, do not fold it.
Store the pump body and hose flat in the SUP bag.
Do not stand on the pump or the hose.
Clean off any sand, it can damage the seals.
Tips for storage and maintenance
Storage tips
Unscrew the hose, roll it up on itself without folding it. Store it flat with the pump.
Restrictions on use
Observe the SUP inflation indications.
TESTS AND WARRANTY
Warranty
2 Years