EXPERIENCE
With its multi-radius sides, you choose the size of your favourite turns.
This ski is between a giant slalom and slalom model. It’s as effective in long turns as short turns.
It's the perfect ski when the slope has uneven or changeable conditions at the peak and inbound
SIDECUT
113/70/101 169 CM
The sidecut corresponds to the mm width of the tip, waist and tail.
The wider the tip, the easier the turn entry.
The narrower the waist ,the quicker the edge switching.
The wider the waist, the more comfortable and stable the ski in changing snow conditions.
Radius= 14.8 m
As for the curve radius, the smaller it is the shorter the ski will turn (small turns)
The bigger the curve radius the more the ski will turn
STRUCTURE
Sandwich design Wooden core + Densolite + full length titanium
Straight edges
world cup base finish
BINDINGS
Atomic branded binding, M 12 GW model.
Grip Walk compatible.
DIN 3 to 10.
Fits ski boots with a sole length between 257mm and 380mm.
Durability
Metal tip end to protect the tip
Preparation
Waxed and sharpened skis, ready to use. Edge sharpened to 89°.
What is the rocker?
When placing a ski on the ground, its points of contact are found near the tip and tail, whereas the middle of the ski (under the bindings) is slightly raised. This is the camber. The longer and higher the camber, the greater the edge grip and more responsive the ski. The lower the camber, the more forgiving the ski and the better the handling.
WHAT IS A ROCKER?
On a "rocker" ski, the tip, and sometimes the tail, comes off the ground sooner than with a cambered ski: this has the effect of moving the contact points toward the centre of the ski. The surface of the ski in contact with the snow is shortened and offers manoeuvrability and floatability in soft snow. When leaning into turns, the edge length offers more edge grip on hard snow. The longer the rocker, the better the handling of the ski.
OUR AFTER-SKI ADVICE
After a long day skiing, this is what you need to do to guarantee your ski's long life:
* Wipe your edges with a cloth at the end of the day to prevent rusting.
* Use ski ties to prevent the soles from rubbing against each other.
* Store your skis in a dry place and away from sunlight.