technical information
32 mm cross-section
tyre type: clincher (stiff bead tyre)
size: 28" x 32 mm (700 x 32C)
ETRTO: 32 - 622
weight: approx. 580 g
How to measure tyre wear
To measure the wear on your tyres and know when they need replacing, you need to inspect the tread. Signs of wear may include:
- the tyre tread beginning to fray
- a series of micro cracks
- flattening of the tread
- the carcass becoming visible.
In all these cases the tyre is worn and needs replacing.
How to remove a tyre
To remove your tyre, deflate the inner tube until no more air comes out.
Once deflated, use a tyre lever to remove the tyre from the rim.
How to fit a tyre
To put the tyre back on, place one side of the tyre into the bottom of the rim. Next, inflate your inner tube to approximately 30% before putting it into the tyre (inflating it beforehand reduces the risk of pinching the inner tube).
Then, insert the other side of the tyre into the rim, starting on the side opposite the valve.
Before inflating the inner tube all the way, check to make sure it isn't pinched between the tyre and the rim.
How to inflate your tyre correctly
Inflate your tyre carefully. The recommended pressure is indicated on the tyre sidewall and in the product file.
Ensure your tyre pressure is correct before each ride.
Tip from the pros
When inflating your tyre, make sure you inflate it to the suitable pressure for the terrain you will be riding on and, above all, the weather conditions you will be riding in.
When riding in rainy weather, lower the tyre pressure to increase the tyre's traction.
On the other hand, when riding in dry weather, you can increase the pressure for better performance.