Set Of 2 Filters For Broyx Filtering Face Mask
Store Availability
Store availability
BENEFITS
Easy dressing
The filter can be replaced easily, quickly and tool-free.
Breathability
Very good breathability thanks to the design and 2 exhalation valves
Filtration
FFP1 NR: Filters > 80% of 0.6 µm particles (equivalent to penetration < 20%)
User comfort
Comfort foam on the nose bridge and fastener at the back of the neck.
TECHNICAL INFORMATIONS
Standards and filtration category
Broyx 4P1 filters are part of the Sport 500 and 700 Broyx face masks, and together they make a personal protection equipment (PPE) product that is certified compliant with standard EN149:2001 + A1:2009.The filtration category is: FFP1 NR. These face masks carry the required CE safety marking.
How does the Broyx filter work?
Solid and liquid particles are removed as air passes through the filter layers. It's one of the most effective methods to filter out particles in the air. This high efficiency is due to the filtering layer's special structure. The fabric's fibres are electrostatically charged, which attracts aerosols (suspended particles) in the air and helps them be caught by the filter.
Make up of a Broyx filter
The Sport 500 and Sport 700 Broyx filtering face masks are equipped with a Broyx 4P1 filter. This filter is made up of the following four layers (numbered from exterior to interior): 1. Pre-filter: for large aerosols
2. Active carbon filter: to neutralise certain odours and aerosols
3. Nanoparticle filter: This is the main electrostatically charged filter. 4. Hydrophobic membrane: to keep moisture away from the filter
Does this mask filter gases?
No. While the active carbon layer in the replaceable filter can filter certain odours, this mask DOES NOT FILTER OUT GASES in the air.
How long does a Broyx filter last?
European standard EN-149 was created to ensure the protection of individuals in the workplace. It assumes that these masks are used for work purposes and not for sports or in an urban environment. For this reason, it is recommended to CHANGE THE FILTER AFTER 8 HOURS OF USE.
The filters are disposable and cannot be washed or reused.
Replacing the original Broyx X-MF4P1 filter
- Remove the valves by turning the outer cover counter-clockwise - Remove the valve seal - Remove the filter layer - Insert the new filter layer - The nose piece must be on the upper part of the mask - Put back the valve seal - Put the valve in place by turning the valve cover clockwise. IMPORTANT: Do not discard the plastic valves or the silicone seals when changing the valve.
Size
Single size
The filters are compatible with both Sport 500 and Sport 700 face mask sizes (M and L)
Storage
Filters must be stored in the manufacturer's sealed packaging (unopened), in a location with an ambient humidity below 80% and temperatures between -10ºC and 30ºC.The maximum time filters can be stored is indicated on the product and at the end of the user notice, in a location that is visible through the packaging. Filters should be protected from mechanical damage, aggressive chemical products, humidity, and dirt.
Tips for storage and maintenance
Storage tips
Filters must be stored in sealed and unopened packaging. Humidity: < 80%. Temperature: -10ºC to +30 ºC. The maximum time filters can be stored is indicated on the product and in the user manual.
TESTS AND WARRANTY
Warranty
2 Years
Agree by
The relevant entity, the Occupational Health and Safety Bureau - National Research Institute (entity number 1437) has performed the EU examination (module B) and has issued the EU certificate number EU/79/2019/1437 version 1 dated 27.02.2019. MANUFACTURER: ALTERSON POLSKA SP. Z O.O. PL.HALLERA 5/14A, 03-464, WARSZAW, POLAND