SIGHT STRUCTURE TECHNICAL DATA:
Magnification: Fixed 4 zoom
Length: 276 mm
Weight: 117 g with the original mount.
Lens diameter: 25 mm
tube diameter: 20 mm
Cross-hairs of the "8" type similar to duplex cross-hairs
SIGHT MECHANICAL DATA
The turrets are graduated in ¼ of MOA
which corresponds to 7 mm at 100 meters per click or 0.7 mm per click at 10 meters.
Using a rule of 3 allows you to find intermediate values.
The adjustment is carried out using a coin or a flat screwdriver.
ADJUSTING THE SCOPE TO YOUR VISION
- Aim at a white wall and observe the cross-hairs on your scope sight. They should appear sharply defined. If not, hold the eyepiece (the part closest to your eyes) and turn it carefully. This adjustment focuses the cross-hairs in accordance with your vision.
- Once you have found the position where the cross-hairs appear well-defined, tighten the locknut situated between the zoom ring and eyepiece to prevent the eyepiece from being moved unintentionally.
HOW TO ADJUST YOUR SCOPE TO SHIFT THE POINT OF IMPACT
- Unscrew the protective caps on the turrets.
- The upper turret adjusts the height (vertical axis) of your point of impact, and is marked UP to indicate the direction for raising your point of impact. (Turn anti-clockwise)
- The turret situated on the right-hand side of your scope sight adjusts in the horizontal axis, and is marked R (Right) to shift your point of impact further to the right. (Turn anticlockwise)