Hiking rain poncho - MT900 - 75L - Red - L/XL
Store Availability
Store availability
BENEFITS
Compact design
Pocket for easily storing the cape. Size: L25 x H23 x D5 cm
Compatibility
Internal volume can shelter a backpack of between 0 and 75 Litres.
Easy dressing
Large front zip the full length of the garment: it is put on like a jacket.
Lightweight
From 510g (S/M) to 580g (L/XL) so you can forget about it at the bottom of your bag.
Robustness
Polyester fabric with good resistance to tearing.
Waterproof
The most waterproof in the range: 5,000 Schmerbers, taped seams and sleeves.
Ventilation
Underarm zip and full zip at the front to allow fresh air to flow inside.
TECHNICAL INFORMATIONS
Fit and sizing information
Good coverage for hikers
between 167 and 176 cm in height in size S/M,
between 177 and 190 cm in size L/XL
and wearing a backpack (capacity of 0 to 75 L).
The hood adjusts in height and depth thanks to an elastic drawcord and toggle. It has a shaped visor, like a cap, for maximum face protection.
The ends of the sleeves are cuffed with rip-tabs that prevent water from entering the sleeves.
Additional recommended products
To complement your outfit, a pair of waterproof over trousers or gaiters is recommended to protect your lower legs perfectly.
Care products: spray or liquid water repellent treatment in the washing machine. To renew the fabric's water repellent-properties and optimise the garment's performance throughout its lifetime.
Storage bag
Built into the product.
Zip fastening. The mesh surface prevents the fabric from being ruined if the garment is folded up while still wet. Sizes: L23.5 x H23.5 x D10 cm.
Pocket system
2 openings for easy access to the jacket or trouser pockets.
Safety
Retro-reflective stripe on the back for greater visibility when night walking on the roadside.
Component waterproofing
We measure a fabric's resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Components with a 5,000 mm rating can withstand the pressure of a 5,000 mm column of water (which is equivalent to a storm lasting 3 hours).
Waterproofing of the garment
Technologies: this garment has been validated in a shower test under 30 cm rain for 3 hours. This test reproduces the average conditions of a mountain storm.
Component breathability
Our rain poncho and cape ranges do not come with a waterproof/breathable membrane.
Therefore, we recommend calm, gentle use to reduce perspiration rather than fast hiking!
Component water resistance
A fabric is water repellent when it allows water slide over its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed throughout the lifetime of the garment (every 3 washes).
All Quechua ponchos and capes have a water-repellent treatment.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Make sure it is completely dry before folding and storing in its storage bag for long periods.
TESTS AND WARRANTY
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 100% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.