Arpenaz 500 women's waterproof walking rain jacket - grey
Store Availability
Store availability
BENEFITS
Anatomic design
Drawstring waist. Depth- and height-adjustable hood.
Modularity
Detachable hood.
Waterproof
8000 mm waterproof membrane. Fully taped seams.
Breathability
Hydrophilic membrane (RET=9): limits condensation inside the garment.
TECHNICAL INFORMATIONS
Sizing information
Fitted, very feminine cut. The inner volume allows you to wear this parka over a warm second layer such as a lightweight pullover or fleece.
Hood
Removable with zip. Height can be adjusted using an elastic drawcord and toggles. Adjustable depth with rip-tab fastening positioned at the back of the hood. Fitted visor provides protection around the face.
Pockets
2 large patch pockets under pressure flaps for hands + 1 outer zipped chest pocket + 1 inside zipped pocket..
Cuff adjustment
with press stud fasteners.
Technical linings
Breathable fabric inside sleeves to optimise perspiration management and provide greater comfort when the jacket is worn over "bare arms" (on top of a T-shirt or another short sleeve garment).
Bi-material lining around the body: Mesh around the top to enhance the garment's breathability / nylon around the hips to optimise ease of movement and resistance to wear.
+ features
Elastic drawcord and toggles to adjust waist size.
Additional recommended products
Care products: spray or liquid water repellent treatment in the washing machine.
To renew the fabric's water repellent properties and optimise performance throughout the lifespan of your garment.
Waterproof component
We measure a fabric's resistance to water pressure, expressed as a water column of mm (based on the ISO 811 standard). The higher the water pressure withstood, the more waterproof the fabric. A waterproof rating of 2000 mm means the fabric can withstand pressure exerted by 2000 mm of water (the equivalent of a rain shower lasting for two hours).
Waterproofing
Technologies: this garment has been subjected to a shower test using 60 litres of water/sqm/hour for 2 hours. This test reproduces the conditions of a rain shower in the mountains.
Component breathability
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity evaporates, and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric / 9
Water repellent component
A fabric is water repellent when it allows water slide over its surface without seeping in. This prevents the fabric from swelling, and keeps it lightweight, breathable and warm. This is achieved through a treatment applied to the fabric's exterior. This treatment must be renewed throughout the garment's lifetime (recommended after every 3 washes). All Quechua waterproof jackets have received a water-repellent treatment.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Yoke: 20.0% Elastane, 80.0% Polyamide
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Always make sure that this waterproof protective garment is completely dry before storing it.
TESTS AND WARRANTY
Test product
All our models are tested by users representative of our target market in conditions identical to those you will encounter when using them. We believe that testing in real life scenarios is the only way to continuously improve the technical suitability and design of our QUECHUA products.
Warranty
2 Years