Women’s Snowboard Jacket - SNB 900 - Blue
Store Availability
Store availability
BENEFITS
Freedom of movement
Loose fit for better freedom of movement, even with back protection.
Abrasion resistance
Components that are resistant to abrasion, and tearing and pulling forces.
Warmth
Layer that cuts the rain and wind without providing additional warmth.
Waterproof
20,000 mm membrane (Schmerbers) and taped seams.
Breathability
Breathable component and mechanical ventilation: RET < 12
Limits snow entering
3D hood compatible with your helmet, automatic sleeve tightening, snow skirt.
TECHNICAL INFORMATIONS
To help you choose the right size
The model wears a size M and measures 175 cm.
Measurements:
Waist size: 66 cm
Hip measurement: 89 cm
Chest size: 92 cm
No compromise on your safety with RECCO®
This snowboard jacket comes with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is equipped with RECCO® reflectors and is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
ZIPROTEC technology making it easier to protect yourself
We pride ourselves on developing products that make life easier and protect you. The ZIPROTEC technology combines your jacket and your women's jacket and DREAMSCAPE DBCK 500 back protector. So now there’s no need to think about it in the morning. Just put on your jacket to protect yourself from bad weather as well as possible impact from falls.
How can I be sure of the strength and durability of my jacket?
Our snowboard jackets are guaranteed for 2 years. We offer repairs locally if your jacket is damaged. Contact us on our website to find out more about how to get your product repaired.
We take particular care in choosing all the elements and assembly processes that make up our ski and snowboard jackets so they are as durable as possible.
Can I be sure my jacket will give me proper protection in bad weather?
To withstand bad weather (rain, snow, wind, etc.), the jacket has been developed with a component and assembly that keep the water out and reduce wind chill. To validate the waterproof properties, this product has been tested over several days of snowboarding in all conditions to validate its watertightness.
Water often gets in through the seams. Does my jacket have taped seams?
In addition to the waterproof fabric, we reinforce the waterproofing of the jacket with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. For this product, all seams (100%) are waterproof.
What is the water repellent feature of my jacket for?
The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using the products available in our stores. All the waterproof jackets that we design for snowboarders are water-repellent.
What is a membrane and what's it for?
A membrane is an extremely thin component (between 5 and 25 micrometres) applied to the internal surface of a textile substrate to give it excellent waterproof and breathable capabilities. Our membrane components stop water getting inside while allowing the water vapour generated by your body to pass through, when snowboarding.
How should I dress to avoid getting cold in the mountains?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule:
- Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or a protective layer to protect against the elements.
How can I stop snow from getting in my jacket?
Our jackets have elasticated snow skirts that can be adjusted at the waist. If you fall or are in fresh snow, the seal keeps the snow out. In addition, this model is equipped with our hermetic and automatic handle clamping technology. The sleeve fits perfectly over your gloves or mittens.
How to wash my jacket?
To optimise your jacket’s performance and durability, we advise the following:
* Machine wash at 30°, synthetic programme.
* Turn the product inside out.
* Add a small amount of detergent. No softener.
* We recommend you wring it by hand.
* Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.
You can restore the water resistance of the outer fabric using a fabric waterproofing spray. Read the care label.
COMPOSITION
composition
Main fabric: 100.0% Polyamide; Yoke: 100.0% Polyester; Membrane: 100.0% Polyurethane; Lining: 5.0% Elastane, 95.0% Polyester; Secondary lining: 100.0% Polyester; Coating: 100.0% Polyurethane; Main fabric - Inner layer: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All the Dreamscape snowboard products are tested in the real-life conditions of use for which they were designed: in the snow, cold and all the conditions encountered when snowboarding and skiing. Our design teams, product managers, engineers and pattern makers make sure that the programme for which the product is designed perfectly matches its use in the field.
Warranty
2 Years
Agree by
The Freeride World Qualifier ambassadors (https://www.freerideworldtour.com/home/freeride-world-qualifier) and by passionate snowboarders and skiers. Are you interested in becoming a tester? Contact us on our website!