M Raincut Fullzip Jacket - Blue
Store Availability
Store availability
BENEFITS
Easy transport
3 pockets: one inner and two outer with rip-tab
Windproof
The fabric of this jacket protects you from winds up to 70 km/h
Waterproof
Waterproof coating 5000mm H2O (Schmerbers) | Main taped seams
Breathability
Hydrophilic coating RET=12: reduces condensation in the clothing.
Ventilation
Ventilation zones on the chest, air circulates to reduce condensation
TECHNICAL INFORMATIONS
Water resistance of the fabric
The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.
This jacket is designed with a waterproof coating (JIS 1092 standard): this component withstands 5000 mm H20 (Schmerber) before washing (i.e. the pressure exerted by a 5-metre water column).
Fabric breathability
Our product's fabric is extremely breathable - 12 TER
The breathability of a component is measured by its "Thermal Evaporative Resistance". This is its capacity to let out water vapour produced by the body during activity. The lower the Thermal Evaporative Resistance (RET) coefficient, the more breathable the fabric.
RET < 9 = extremely breathable fabric.
RET < 12 = highly breathable fabric.
RET < 20 = breathable fabric.
RET > 20 = slightly or not breathable fabric.
Available in S to 4XL
Our priority? That our hiking clothes fit all body shapes and figures! So that everyone who wants to can enjoy hiking trails in complete comfort. That's why this jacket is available from S to 4XL.
Choose your waterproof jacket according to your sports effort
During sports activity, the extent to which we perspire depends on the intensity/duration of the physical effort.If the breathability of the fabric is not adapted to your type of physical activity, the perspiration vapour condenses inside the jacket.You feel damp inside:It is not rain coming through but perspiration vapour condensing.Choose a rain jacket according to your type of physical activity. This jacket is designed for 2-hour hikes at no more than 5km/h
COMPOSITION
composition
Main fabric: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
We advise you to always make sure that this rain jacket is completely dry before storing it.
Restrictions on use
Not recommended for intense exercise.
TESTS AND WARRANTY
Test product
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute-Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing high-quality products for your hikes and giving you access to all our expertise.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested out in the heart in the type of conditions you may encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market. This waterproof has undergone numerous tests to check its waterproofing and robustness
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 62% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 3% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.