ELECTRIC CAMPING PUMP - ULTIM COMFORT 20 PSI - RECOMMENDED FOR INFLATABLE TENT
Store Availability
Store availability
BENEFITS
Compact design
All the necessary accessories are stored and attach to the pump itself
Compatibility
1 x 5 m extension cable 1 boston tip, 1 mini boston tip, 1 high pressure tip
Ease of use
Adjust the pressure, start the pump and leave it to inflate (Tent: 7 PSI)
Power
Inflates a tent at 7 PSI in a few minutes
Modularity
Connect the INFLATE tube to inflate and DEFLATE to deflate.
Parameter measurement
Inflates up to 20 PSI and automatically stops at the target pressure
TECHNICAL INFORMATIONS
Connection
Operates connected to a 12 V vehicle power socket, engine running (13.8 Volt)
5 metre extension.
Compatible with minimum 10 amp fuses.
Provides pressure up to 20 PSI( 1.37 bar).
SAFETY ALERT
If you forget to start your vehicle’s engine or in case of bad contact with the power socket, your pump will automatically issue a warning and will stop to avoid damaging the vehicle's fuse.
INFLATION
- Connect to the pump to the power socket with the car engine running,
- Connect the pump tube to the tent,
- Select the pressure: PSI/Bar,
- Adjust the recommended pressure using the +/- buttons,
- Start to inflate by pressing POWER,
The pump will stop automatically when it reaches the target pressure.
Adjust the target pressure by 0.1 PSI (0.01 Bar) up to 20 PSI (1.37 BAR)
A volume cycle up to 0.4 PSI then a pressure cycle up to 20 PSI
DEFLATION
- Connect the pump to the power socket,
- Connect your tube to the “DEFLATE” outlet on the pump and connect it to your tent's valve,
- Select the pressure: PSI/Bar,
- Press the (-) button until “DEFLATE” is shown on the screen,
- Start the deflation by pressing “POWER”,
- To stop it, press “POWER” or wait 120 seconds until the cycle ends.
SIZE
Length: 28.5 cm
Width: 19 cm
Height: 9 cm
Pump weight: 1.6 kg
Extension cable weight: 315 g
Total weight: 1.9 kg
Supplied with a set of multi-tips
As well as its “boston” tip to inflate inflatable tents, mattresses and low pressure kayaks, the pump comes with:
- 1 x 5 m extension cable to make inflation easier on your campsite
- A high pressure SUP and KAYAK drop stitch tip
- A mini boston tip to inflate kayak seats
- An adaptor and tip to inflate certain kitesurf wings
COMPOSITION
composition
Metallic structure: 100.0% Polycarbonate; Main part: 100.0% PCBA
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store in a dry place. Avoid dust and sand.
Restrictions on use
Follow the pressure levels stated on your inflatable product.
TESTS AND WARRANTY
Test product
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute-Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing high-quality products for camping trips and giving you access to all our expertise.
Warranty
2 Years
Agree by
To fulfil your needs, the Quechua products are tested in the countryside under the conditions that you will come across when camping. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.