Kids' Steamer Full Wetsuit 100 4/3
Store Availability
Store availability
BENEFITS
Easy dressing
Ankle zips and back zip, making it easier to put on.
Freedom of movement
Shaped to optimise arm rotation while paddling. Stretch seams.
Waterproof
Stitch-bonded 4 & 3 mm neoprene. Under-zip flap. Adjustable neck. Must be tight.
TECHNICAL INFORMATIONS
Choose the right size
To make the most of the features of your wetsuit, it is necessary to choose the correct size. A surfing wetsuit should be a very tight fit and there should be no visible folds. When dry, it is perfectly normal to feel like it is too tight, this discomfort disappears as soon as the wetsuit gets wet. If you choose a diving suit that is too big, folds will appear, you will experience irritation and thermal insulation will be reduced (letting in water).
Try it on before you buy it!
Materials
The neoprene is lined with polyester fabric for added resistance to wear. Neoprene thickness: 4/3 mm. Neoprene is a closed-cell elastomer foam (polychloroprene) containing nitrogen bubbles.
Neck
The neck finish has been developed to limit irritations. According to the sensitivity of the wearer, a UV top can be worn under the wetsuit to reduce the risk of irritation. The application of grease (e.g. Vaseline) in friction areas (neck, underarms) is also recommended if wearing the diving suit for long periods.
Make sure the flap is always inside the wetsuit to limit the risk of irritation with the zip and the neck.
Watertight assembly
The seams are stitched and glued to guarantee waterproofing and resistance. The seams are "blind-stitched", which means the thread does not pass through the entire thickness of the neoprene and so prevents water from getting through. The absence of threads on the inside avoids irritation and chafing.
Comfort and reinforcement patches are strategically placed on the inside in sensitive areas.
Fastening
Our zips and fastenings are laboratory tested in order to ensure an optimal lifespan and good resistance to salt water. We have put the zip at the back of the wetsuit for more comfort during surf sports (when lying down to paddle).
Zip pull
We are required by law to put a short cord on the zips of junior products to prevent the risk of strangulation for the youngest users. For older kids, you can add a longer cord so that they can operate the zip themselves. A small rip-tab prevents accidental opening of the zip during use.
Multi-watersports wetsuits
Our wetsuits are designed to meet the needs of the most demanding surfers. Our design choices also make them compatible with other water sports.
COMPOSITION
composition
Foam: 100.0% Rubber; Main fabric: 100.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
In a dry, well-ventilated place. Avoid heat sources. To extend the life of your wetsuit, do not leave it out to dry in direct sunlight. Machine washing is not recommended.
Restrictions on use
Designed for water between 12 and 17°C.
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality.
Parts guarantee
2 years