Inflatable Touring Kayak 2-3-person
Store Availability
Store availability
BENEFITS
Easy assembly/dismantling
Inflation in 10 minutes to a pressure of 1.5 PSI (0.1 bar) Do not over-inflate.
Glide performance
The patented bow shape gives the kayak good glide performance. 3 keels.
Volume
For 2 to 3 people, up to a maximum of 230 kg (507 lbs).
Stability
Side stoppers and inflatable board for good stability.
User comfort
Raised seat for comfort when at rest and when paddling.
Repair
Spare parts available online or at you nearest Decathlon workshop.
TECHNICAL INFORMATIONS
Seat comfort
The front and back seats are high, this provides increased comfort for adults in the paddling position.
The seats are arranged according to the number of persons on board, on the diagrams printed on the floor:
In front of the "2+1" diagrams (which remain visible) when there are 3 persons on board. In front of the "2" markings when there are 2 persons on board.
Technical dimensions and weight.
INFLATED SIZE
Length: 382 cm
Width: 108 cm
SIZE WHEN FOLDED IN BAG
Height: 73 cm
Width: 44 cm
Thickness: 33 cm
Weight: 17 kg
Maximum pressure: 0.1 bar (1.5 PSI)
Seats: 2 or 3 seats
Contents: kayak, bag, repair kit, keels
PUMP NOT INCLUDED
PADDLE NOT INCLUDED
For use with an Itiwit double-action hand pump with adapters
After-sales service
Spare parts are available for Itiwit kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to collect or order some.
Inflation recommendations & precautions
Inflate the floor, then one of the side tubes, then the second one to 50%. Check the overall positioning of the chambers. Then fully inflate it without exceeding 0.1 bar (1.5 psi).
DO NOT OVER INFLATE!
Close the valves well.
Install the 3 skegs, unless using on a river containing little water.
In the event of EXTREME HEAT, slightly deflate the kayak out of the water to avoid over-inflation, which could damage the kayak.
Do not leave inflated in direct sunlight: risk of over-inflation
Care instructions
In the event of damage to one of the side chambers, open the side tube lengthways using the zip and remove the chamber.
The floor can be uncovered by opening the hook and loop fastenings.
Example 1: the hole is in the side tube; you can use the repair kit to stick on a patch.
Example 2: the hole is located along a seam; contact the DECATHLON workshop service to exchange the faulty bladder (2-year warranty).
Glide performance
Patented bow shape: the front and back ends provide good glide. The V-shaped front of the kayak enables smooth entry into the water.
Easy to disassemble and fold
New carry bag, backpack style for short distances.
Easy clip fins.
Deflate the kayak by opening the 3 "Boston" valves.
Fold the lateral tubes down onto the floor.
Roll, starting from the opposite side to the valves to remove the air.
Place the rolled-up kayak into the main compartment of the bag.
Close the zip and tighten using the compression strap.
Directions for use.
We recommend that you use the product with a buoyancy life vest.
regulations for canoes/kayaks under 3.50 metres
Is your canoe-kayak inflatable or rigid and is less than 3.50 metres? You have what is called a beach craft.
You must always stay 300 metres from a shelter (any place on the coast where any boat or vessel and its crew can get to safety by anchoring or berthing and leave without assistance).
Buoyancy aids are not mandatory but strongly recommended to make it easier to get back in the boat if you fall out.
regulations for canoes/kayaks over 3.50 metres
Your canoe-kayak is rigid or inflatable with at least 2 separate air chambers. It measures more than 3.50 metres. It is "sea approved" by the manufacturer.
You can paddle up to 2 nautical miles (approx. 3 km) from shore. You will need a number of safety features.
You can find these elements using this link: https://www.itiwit.fr/reglementation-pour-faire-du-canoe-kayak
COMPOSITION
composition
Main fabric: 100.0% Polyester; Inside shell - Main fabric: 100.0% Polyvinyl Chloride
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Deflate, fold up. Store in a cool, dry place.
TESTS AND WARRANTY
Agree by
ISO 6185-1 standard. Category IIIB (beach craft) Complies with French Division 240 regulations (sailing up to 300 m from shelter)
Parts guarantee
Guaranteed availability of spare parts essential to use of product: 2 years Availability: 10 years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 16% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.