GIRLS' WARM WATERPROOF HIKING SNOW BOOTS - SH500 ZIP - SIZE 11.5 - 5.5
Store Availability
Store availability
BENEFITS
Easy opening / closing
Easy to get on/off thanks to the zip on the side
Traction
Traction on snow thanks to the location and depth of the 5 mm studs
Grip
Grip with SNOWCONTACT technology: materials and tread pattern of the soles
Warmth
Comfort temperature: -7°C Limit temperature: -18°C
Waterproof
Breathable, waterproof membrane to keep your feet dry
Foot support
The lacing provides precise tightening for optimal support
TECHNICAL INFORMATIONS
Can I be sure that my boots are warm enough for my winter hikes?
We perform comparative studies carried out in a thermal laboratory, in walking conditions in light winds (5km/h). This is how we measure the thermal resistance of our boots. However every individual feels the cold differently.Comfort temperature: felt slightly cold and 70% of users found their thermal feeling acceptable on the feet.
Limit temperature: felt extremely cold and 10% of users found their thermal feeling acceptable on the feet.
How do my boots protect me from outdoor conditions?
Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering while allowing moisture to escape.
How can I be sure my boots are 100% waterproof?
We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and ageing.
What is the difference between traction and grip?
The boots’ traction depends on the number and shape of the studs (4mm on this boot). The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot.
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.
Will my boots withstand regular use over the long term?
Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
How do I choose the right footwear for snow hiking?
To be well equipped in winter, we recommend that you follow these guidelines :
Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool)
Breathability: Choose the sock according to the intensity of the hike and make sure you wear a breathable model to minimise moisture.
Boot height: adapt the height of the sock to the height of the upper and preferably choose high models if you want more protection.
How to preserve the technical qualities of my boots?
A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the the boot. Products (spray or liquid) for this purpose are available in our stores.
How to dry the inside of your boot.
In use, the boot can become damp (condensation and perspiration)
If the boot is very wet, we advise you to remove the insole, fill the upper with newspaper balls and change them regularly. The paper will pump out moisture and speed up drying.
Never bring the boots too close to a heat source, but leave them in a warm, dry and ventilated place.
COMPOSITION
composition
Upper of: 25.0% Polyurethane, 75.0% Polyester; Lining and sock of: 15.0% Acrylic, 6.0% Polyurethane, 79.0% Polyester; Outer sole of: 100.0% Synthetic Rubber
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store your products in a well-ventilated room away from light and moisture.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Body shape (in particular from 3D analysis) Movement science Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences In particular, we test the holding of seams, gluing, toxicology, resistance to UV and abrasion.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our field test engineer, our product manager, as well as a panel of testers test the products throughout their development until they are marketed.
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialSilica-based rubber from rice husks
Product made from 9% silica-based rubber from rice husks
Using silica-based rubber from rice husks rather than conventional rubber reduces the CO2 emissions linked to the material by at least 17%.
-
MaterialRecycled polyester
Product made from 19% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 6% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.