Scuba Diving Regulator CALYPSO DIN 232 bars

FIRST STAGE

DIN connection (max 232 bars / 2900 psi)

Maximum working pressure 232 bars

Unbalanced piston mechanism.

Flow rate at 200 bars: 1300 L/min.

In-line body with 1 HP outlet (7/16") and 4 MP outlets (3/8").

Chrome-plated marine brass body.

Stainless steel spring

Sintered bronze conical filter

EPDM O-rings

Weight: 400 g

SECOND STAGE

Unbalanced downstream valve mechanism

Venturi adjustment knob (ergonomic design for ease of use, even with gloves).

Average work of breathing (WOB): 1.0 joule/litre

Polyurethane valve

Adjustable stainless steel crown

Polyurethane purge cover

Soft and sturdy Comfo-Bite mouthpiece to reduce jaw fatigue

Hose length: 730 mm

Weight: 175 g

MAINTENANCE

Make sure you put the dust cap on properly.

Soak the regulator in a tray of fresh water.

DANGER: If you use a hosepipe, do not use a pressure jet to clean the 2nd stage. The pressure of the jet could damage the membrane and/or the internal valve.

Wipe the regulator dry.

Do not expose your regulator to full sunlight for a lengthy period.

STORAGE

Store your regulator in a clean environment away from light and at a moderate temperature.

Do not store it near a source of heat or in a room that may contain chemical vapours like chlorine, ozone, etc. (e.g. a swimming pool machine room).

Never store the regulator on top of a cylinder/tank

DANGER: Never use solvents or hydrocarbon-based products to clean or lubricate your regulator. Never use spray cans.

SERVICING

Aqualung advises you to service your regulator every two years and to make a visual inspection at least once a year.

These two inspections should be carried out by a Aqualung approved workshop

Your regulator should be services more frequently depending on the number of dives and conditions of use.