BOY'S SURFING 1.5 MM NEOPRENE SHORTY WETSUIT 500 BLUE BLACK
Store Availability
Store availability
BENEFITS
Easy dressing
Zip down the back. Long zip pull from 10 years.
Freedom of movement
More flexible neoprene on the upper body and arms. Stretch seams.
Waterproof
1.5 mm neoprene. Zip flap. Adjustable neck. Must be a tight fit.
TECHNICAL INFORMATIONS
DO YOU HAVE A HOLE OR TEAR IN YOUR WETSUIT? DON’T THROW IT AWAY!
Decathlon is committed to ensuring that all its neoprene wetsuits are repairable!
You can find our repair products here: https://www.decathlon.fr/p/kit-pieces-reparation-neoprene-scd-avec-feuille-3-et-5-mm/_/R-p-301623?mc=8501856
You can also find our repair tips: https://support.decathlon.fr/combinaison-de-surf-decathlon-sav
Choose the right size
To make the most of the features of your wetsuit, it is necessary to choose the correct size. A surfing wetsuit should be a very tight fit and there should be no visible folds. When dry, it is perfectly normal to feel like it is too tight, this discomfort disappears as soon as the wetsuit gets wet. If you choose a diving suit that is too big, folds will appear, you will experience irritation and thermal insulation will be reduced (letting in water).
Try it on before you buy it!
Materials
The neoprene is lined with polyester fabric for added resistance to wear. Neoprene thickness: 1.5 mm. Neoprene is a closed-cell elastomer foam (polychloroprene) containing nitrogen bubbles.
Neck
The neck finish has been developed to limit irritations. According to the sensitivity of the wearer, a UV top can be worn under the wetsuit to reduce the risk of irritation. The application of grease (e.g. Vaseline) in friction areas (neck, underarms) is also recommended if wearing the diving suit for long periods. Make sure the flap is always inside the wetsuit to limit the risk of irritation with the zip and the neck.
Fastening
Our zips and fastenings are laboratory tested in order to ensure an optimal lifespan and good resistance to salt water. We have put the zip at the back of the wetsuit for more comfort during surf sports (when lying down to paddle).
Zip pull
We are required by law to put a short cord on the zips of junior products to prevent the risk of strangulation for the youngest users. Above size 10 years, the cords are long so that the kids can use them by themselves. A small rip-tab prevents accidental opening of the zip during use.
Key pocket
There is a key pocket under the zip flap. From size 10 years.
Multi-water sports wetsuits
Our wetsuits are designed to meet the needs of the most demanding surfers. Our design choices also make them compatible with other water sports.
COMPOSITION
composition
Foam: 70.0% Latex Styrene Butadiene Rubber, 30.0% Rubber; Main fabric: 100.0% Polyester; Upper part - Main fabric: 100.0% Polyamide; Outside shell - Secondary lining: 14.0% Elastane, 86.0% Polyester
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
In a dry, well-ventilated place. Avoid heat sources. To extend the life of your top, do not leave it out to dry in direct sunlight. Machine washing is not recommended.
Restrictions on use
Designed for water over 21°C
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality.
Agree by
In order to meet your requirements, OLAIAN products are tested in the sea, in the wave conditions that you are likely to encounter during your sessions. A field test engineer, product engineer, as well as a panel of child testers and partner clubs, put the products through their paces throughout their development until they reach the market.
Parts guarantee
2 years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 17% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.