Men's Hiking Boots - NH100
Store Availability
Store availability
BENEFITS
Lightweight
Each boot weighs 332 g in size 43 (UK size 9).
Traction
Sole design and 4 mm spike clears mud easily.
Grip
Sole composition & design encourages grip on walking trails.
Cushioning
EVA midsole guarantees comfortable cushioning.
Fitting comfort
5 mm EVA insole | No seams on the heel.
TECHNICAL INFORMATIONS
Strength & durability
Laboratory tests were conducted to test the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing. These tests allow us to improve the quality of our products and prevent premature wear of our hiking shoes.
Comfort
Our country walking boots promise one thing and that’s heightened comfort for the wearer; to this end, we have included different ingredients in this boot to take care of your feet such as the EVA foam midsole and insole (ethylene vinyl acetate), or the neck of the boot (top heel section) which includes a synthetic foam for greater comfort when worn.
We have also eliminated the seams in the heel area to avoid any discomfort.
Resistant soles for walking trails
The sole’s design is the result of long research carried out in our labs. It is composed of a specific rubber formula which optimises grip and traction. We are always looking for the best solution to progress on loose or mineral (forest or coastal) walking trails.
When used on roads, this can lead to the premature wear of your boots and cause discomfort. They are not suitable for high mountain walking.
What socks should you wear with the Quechua NH150 boots?
These shoes are slightly breathable but not enough to wick away all humidity created by your perspiration. We advise you to choose Hike 100 Low or Mid socks: they contain moisture-absorbing cotton and have a reverse terry-knit construction under the sock that wicks moisture away from your foot. They are also high enough to protect your ankle from the shoe. It is an excellent combination to reduce the chance of blisters.
COMPOSITION
composition
Outer sole of: 50.0% Synthetic Rubber, 50.0% Ethylene Vinyl Acetate; Upper of: 40.0% Polyurethane, 60.0% Polyester; Lining and sock of: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
We recommend you store your boots in a dry, dark and, if possible, ventilated place away from any heat source.
Restrictions on use
Extensive urban use is not recommend (avoid too much tarmac)
TESTS AND WARRANTY
Test product
Our Quechua global design centre is based at the foot of Mont Blanc in Haute-Savoie (FRANCE). This location makes it a real meeting place for our design teams and outdoor sports enthusiasts. Our products are not only tested in our laboratories but also on different terrains, in Haute-Savoie for mountain use, and also on the coast and in forests worldwide.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested out in the heart of nature in the type of conditions you may encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRubber recycled
Product made from 11% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 26%.
-
MaterialRecycled polypropylene
Product made from 1% recycled polypropylene
Using recycled polypropylene rather than conventional polypropylene reduces the CO2 emissions linked to the material by at least 44%.
-
ProcessDope dyed
Product made from 6% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 13% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessWater-based polyurethane
Product made from 2% water-based coated polyurethane
Using this water-based coating process rather than a conventional process enables us to reduce the CO2 emissions linked to the production of the component by at least 44%.