Men’s Waterproof Jacket - 20,000 Schmerber - MT900 - Black
Store Availability
Store availability
BENEFITS
Compact design
Folds into its hood
Freedom of movement
Preformed elbows, adjustable hood, easily-accessible pockets with a backpack.
Robustness
Sturdy fabric (155 g/m2; 70 Denier) on friction areas.
Weight
The hybrid structure reduces the weight to 550 g in size L.
Waterproof
Waterproof material, 20,000 mm of water (Schmerber rating).
Pockets
2 hand pockets (with a mobile phone compartment in the right one)
Breathability
RET < 8 for the lightest fabric; RET < 12 for the most resistant fabric
Ventilation
Double slide on the ventilation zips under the arms and on the central opening
TECHNICAL INFORMATIONS
How has this jacket been designed to withstand bad weather?
As waterproofing isn’t limited to the fabric used, we also guarantee that the assembly of the parts doesn’t let water through.
For increased protection:
- Double tightening with an elastic cord at the hem.
- Velcro-adjustable sleeve cuffs covering the wrist.
- Gusset at the wrist to make it easier to wear gloves.
- Watertight zip
- Sealed and thermobonded seams
How can this jacket adapt to your activities?
Thanks to its ventilation zips, this jacket allows you to regulate heat during exercise.
- The wide hood is fully adjustable both vertically and horizontally. Semi-rigid visor with integrated mesh headband to provide a high level of protection and better support.
- Ergonomic pre-shaped cut to follow all your movements.
How waterproof is the fabric level?
This jacket has two waterproof components (norm JIS L 1092):
- The main fabric is highly waterproof. It is resistant to 20,000 mm of water (Schmerber rating) before washing
- The secondary fabric on the reinforced sections is also resistant to 20,000 mm of water (Schmerber rating) before washing.
What is the breathability rating of this jacket?
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the JIS L 1099 B1 standard). The lower the fabric's resistance, the more water vapour generated by physical activity evaporates, and the higher the fabric's breathability.
It is considered that if:- RET < 9 = highly breathable fabric
- 9 < RET < 12 = breathable fabric.
The breathability qualities of this jacket:
RET < 8 for the main material
RET < 12 for the secondary material
How many pockets does this jacket have?
This jacket has two hand rest pockets with a watertight YKK AquaGuard zip. Accessible even when wearing a bag on your back.
There is a mesh pocket for a mobile phone inside the right pocket to keep it safe and prevent it from falling out when you open your pocket.
What are the special features of central zip opening?
- Features a waterproof YKK AquaGuard zip along the entire length with an inside flap providing protection from the wind.
- Double slide lets you open the jacket from the bottom.
- Soft fabric flap at the top of the collar to protect the chin.
How does this jacket provide optimal protection?
This bi-material jacket combines:
- A durable and protective fabric (155 g/m2; 70 denier) on the areas to be protected from friction (shoulders, outside of the sleeves, bottom of the garment at the front and back)
- A light and breathable fabric (102 g/m2; 20 denier) on the rest of the jacket.
This asymmetric jacket has a slightly longer back than front in order to provide maximum protection in all your movements, when in action or bivouacking.
COMPOSITION
composition
Main fabric: 100.0% Polyamide; Outer fabric: 68.0% Polyester, 32.0% Polyamide; Membrane: 100.0% Polyurethane; Pocket: 6.0% Elastane, 94.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Do not dry near to a direct source of heat (radiator)
Restrictions on use
Do not wash at higher than 30°C
TESTS AND WARRANTY
Warranty
2 Years