Instant Camping Shelter - 1 adult or 2 kids - 2 Seconds 1P
Store Availability
Store availability
BENEFITS
Water repellent
Protects from light rain | Note: Non-taped seams.
Easy transport
Folded format: 56 cm disk | Carry strap I Weight: 1.1 kg.
Ease of use
Instant pitching | Freestanding: may be easily moved once set up.
Capacity
Shelters 1 adult or 2 kids I Width 105cm I Depth 145cm I Height 110cm
Sun protection
Sun protection, UPF 50+ (laboratory tested).
Heat reduction
Cross ventilation with its wide front opening and back ventilation.
Wind resistance
Withstands winds of around 30 km/hr (force 4) | Wind tunnel test.
TECHNICAL INFORMATIONS
Sun protection
Our main fabric is made from 75D (Denier) polyester fibres, coated in polyurethane to guarantee UPF 50+ sun protection.
Caution: Since some UV rays pass directly or indirectly through the front of the tent, we advise you to protect your skin.
Pitching and dismantling
This shelter uses our 2 Seconds technology so the pole structure is pre-assembled on the textile cover.
Before using the tent for the first time, read the pitching and dismantling instructions on the product and watch the video available on our website Decathlon.fr.
When opening it, make sure people stay around 3 m away and hold the shelter at arm’s length.
The tent is self-supporting. Position it and put the three pegs in place.
Wind resistance
We test all our tents in a wind tunnel on a turntable. The goal is to expose each side of the shelter to the same wind intensity.
Properly pitched, this shelter remains habitable in wind speed 4, measured at 30 km/hr.
rain protection
This shelter protects you from light rain thanks to the polyurethane-coated polyester fabric. The groundsheet protects you from damp and water run-off.
Warning! The seams are not sealed, which means it does not provide protection against heavy rain.
Don't throw away, repair
This tent is designed to be repairable. Spare parts and repairs are available at the workshop at your local Decathlon shop or on Decathlon.fr.
Here are the reference numbers for the spare parts:
- Lower pole Ø 4 mm cut to size: 8600932 (length = 3550 mm),
- Upper pole Ø 5 mm cut to size: 8600931 (length = 6020 mm),
- Fabric adhesive patch kit - blue: 8584596,
- Fabric repair adhesive roll - blue: 8584597.
Care and storage advice
Our shelters have been designed for occasional outdoor use (4 weeks per year) during your adventures in the great outdoors. Continued exposure to UV rays over several weeks can damage the fabric. These products are not classified as “garden furniture” and aren’t designed to be left outdoors permanently. To guarantee maximum robustness of your shelter, it's important to clean it and to store it in its cover when not in use.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Floor mat: 100.0% Polyethylene; Pole: 100.0% Glass Fiber
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Before storing it, leave you shelter to air-dry then make sure it’s thoroughly dry, including underneath. This will prevent any odours or mould from forming.
Restrictions on use
Protect yourself from the sun. Do not use when it is raining.
TESTS AND WARRANTY
Test product
This product was approved following a wide variety of laboratory and field tests, by our users.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested out in the heart of in the type of conditions you may encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessBiton
Product made from 86% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 39% compared to conventional dyeing.
-
ProcessDope dyed
Product made from 12% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.