Women's Freeride Ski Jacket - Eclipse Day - Purple
Store Availability
Store availability
BENEFITS
Freedom of movement
Wide fit, preformed sleeves for freedom of movement when skiing.
Adjustable
Tightening - cuffs with velcro. 3D adjustable hood. Adjustable snow skirt.
Warmth
Waterproof layer 3. To control the heat you have to add a 2nd layer.
Waterproof
3 layer membrane component, 20,000 Schmerbers and thermo-bonded seams.
Pockets
Chest pocket. Ski pass. Connected hand pockets and an inside mesh pocket.
Breathability
Membrane helps wick away perspiration RET9. 2 large ventilation zips.
TECHNICAL INFORMATIONS
Design and assembly in France
We manufacture this jacket at TopTex3, known for its technical expertise in glue assembly.
In real terms, once each piece of the jacket is cut it’s assembled together by hand using a press and glue instead of the usual machine and thread. Visually, you will have a very sleek seamless jacket.
Technical components
- Laminated with a membrane and a 100% polyester mono-component fabric
- European origin
- Highly resistant to abrasion
-20,000 mm waterproofing
- Oekotex standard 100
Washing
We have purposefully lined the inside front neck with the outer fabric to make hand washing easier.
Note: we're talking about the place where sun cream tends to stay...
If you have to machine wash then:
- 30°C maximum and a delicate programme
- 800 turns/min spin
- Above all, do not tumble dry, the glue hates the heat.
This product is repairable
This product is repairable throughout its lifecycle and is under warranty for 2 years. To find out more you can contact us at the following email address. Contact: [email protected]
Waterproofing of the jacket
To go beyond an indicative value of waterproofing, at Decathlon we test all our waterproof products in the laboratory. How do we carry out this test? We have an articulated model that wears the jacket and then spends a few hours under a shower.
Using this test, we can confirm that the jacket protects you from snowfall or an intense shower of 18 cm in 3 hours.
What should you wear under your skiing jacket?
To keep warm and dry, use the 3-breathable-layers rule:
- 1 ski base layer as layer 1. The base layer keeps you dry by wicking away the perspiration from the skin to the other layers.
- 1 jacket liner as layer 2 to keep warm. it provides warmth, this is the case for down jackets or fleece pullovers.
- 1 ski jacket as layer 3 to protect against bad weather.
To help you choose the right size
The model is wearing size M and is 1.72 m tall
Their measurements are as follows:
- chest measurement: 90 cm
- hip measurement: 90 cm
- waist measurement: 62 cm
What is the RECCO® system?
All our Freeride jackets and trousers are equipped with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is equipped with RECCO® reflectors and is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker. RECCO reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Skirt fabric: 14.0% Elastane, 86.0% Polyester; Membrane: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry this waterproof protective garment thoroughly before storing it.
Restrictions on use
A second layer is essential for good thermal comfort.
TESTS AND WARRANTY
Test product
Our team of designers is based at the foot of the Mont-Blanc, near many ski resorts in Haute-Savoie (France). All year round, we create and develop products that are simple and technologically advanced. These are then ruthlessly tested in the field, because we believe that the only way to continuously improve our products is to test them under the real-life conditions that you will experience in use.
Parts guarantee
2-year warranty and repairable.
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 84% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.