Surfing booties YULEX, 3 mm, 900, black
Store Availability
Store availability
BENEFITS
Easy dressing
Heel pull tab.
Sensitivity
Thin, flexible sole for good contact with the board.
Grip
Non-slip sole for good grip on the board.
Stability
Ankle rip tab for a better hold. Foot pocket with separate big toe.
TECHNICAL INFORMATIONS
Stay warm for longer thanks to our thermal accessories! Each temperature range has its own outfit...
When we are in the water, we lose more than half of our body heat through our extremities (feet, hands, head). Consequently, here are the recommended accessories:
- in water (>17°C) => Low neoprene shoes.
- in water (12 - 17°C): High foot pockets and hood.
- in water (7 - 12°C): High foot pockets, gloves, hood and hooded top.
How to choose the right booties
The first selection criterion when choosing a surf foot pocket is the temperature of the water in which the rider surfs. Water temperature varies according to the location and the time of the year. Systematically make sure that the water temperature at your spot corresponds to the recommended temperature range:
Water warmer than 21°C.Water between 17 and 22°C.
Water between 12 and 17°C.
Water between 7 and 12°C.
Visit the site seatemperature.org to find out the temperature of your spot.
Choose the right size
Surfing foot pockets must be a very tight fit for optimal efficiency. It is perfectly normal for it to feel like they are too tight when tried on dry. Choosing tight foot pockets guarantees a better fit and prevents them from swelling with water when surfing.
Materials
The 3 mm surf foot pockets are made of 85% natural rubber (Yulex) for improved comfort when surfing.
The component is lined with a synthetic fabric for increased resistance to wear.
Thickness of the foot pocket: 3 mm.
We test and guarantee the quality of our natural rubber materials.
Watertight assembly
The seams are stitched and glued for optimal waterproofing. The seams are blind-stitched. the thread does not go all the way through the neoprene, preventing water from getting through. The absence of threads on the inside avoids irritation and chafing. Comfort and reinforcement patches are strategically placed on the inside in sensitive areas.
How to look after your foot pockets
Rinse and then roll the top part downwards. Then hang them inside out so that the air can circulate. If the smell is too strong, you can put baking soda (1 teaspoon) directly into the foot pockets before rinsing them.
What is the Decathlon Surf brand?
Based in Hendaye in South-West France, in our offices at the water's edge, we can design a range of accessories and then on the same day go surfing and test them.
COMPOSITION
composition
Foam core: 85.0% Latex Rubber, 15.0% Rubber; Outer sole of: 100.0% Dry Styrene Butadiene Rubber; Upper of: 17.0% Elastane, 83.0% Polyamide; Lining and sock of: 47.0% Polyamide, 53.0% Polyester
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
In a dry, well-ventilated place. Avoid heat sources. To extend the lifespan of the Yulex, do not leave to dry in direct sunlight. Machine washing is not recommended.
Restrictions on use
Designed for water between 12°C and 17°C.
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality.
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 32% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.