Shorty long-sleeved briefs with front zip PALMDARK
Store Availability
Store availability
BENEFITS
Easy dressing
the front zip makes it easier to get on and off.
Freedom of movement
More flexible neoprene on the upper body and arms. Stretch seams.
TECHNICAL INFORMATIONS
YOU ARE AN INTERMEDIATE SURFER
You regularly go surfing.
During your sessions, you paddle out to the line-up, duck dive under the breaking waves if you are on a shortboard (or turtle roll if you are on a longboard) then surf waves of less than one metre.
You often fall and are used to being shaken about underwater. Your swimsuit must meet the requirements of your activity and stay in place for each of your movements. We have designed a range for you that is suited to regular activity and your body shape.
How to choose the right wetsuit (Part 1)
The first selection criterion when choosing a surfing wetsuit is the water temperature.
Water temperature varies according to the location and the time of the year.
Systematically make sure that the water temperature at your spot corresponds to the recommended temperature range:
Water warmer than 20°C.
Water between 17 and 22°C.
Water between 12 and 17°C.
Water between 7 and 12°C.
Visit the site seatemperature.org to find out the temperature of your spot.
How to choose the right wetsuit (Part 2)
Also take into account the length of your sessions.
For sessions lasting less than 1 hour, the 100 models are suitable.
Up to 2 hours, go for a 500 model, with slightly thicker neoprene.
Up to 3 hours (or if you feel the cold), check out our 900 models.
The 500 models offer better warmth, greater flexibility to reduce fatigue, improved mobility, and enhanced protection against chafing.
The same goes for the 900 models. NOTE: the 900 models are easier to put on.
Choose the right size
To get the most out of your wetsuit, it’s essential to choose the right size.
We recommend trying on your surfing wetsuit before purchase and simulating paddling or take-off movements (whether inside or outside the changing room—don’t worry, we don’t judge at Decathlon!).
A surfing wetsuit should be a snug fit, with no visible creases under the arms or at the back.
It’s normal for it to feel slightly tight when dry, but this discomfort disappears once you’re in the water.
FASTENING
Our zips and fastenings are laboratory tested in order to ensure an optimal lifespan and good resistance to salt water.
We have put the zip at the front of the wetsuit for more comfort when doing water sports, especially surfing, and to minimise water entry into the suit.
An outfit for every temperature range
When we are in the water, we lose more than half of our body heat through our extremities (feet, hands, head).
As such, here are the recommended accessories for surfing:
- In water > 17°C: low neoprene shoes.
- In water between 12 and 17°C: Surf boots and gloves.
- In water between 7 and 12°C: Surf boots, gloves, hood or hooded top.
GUARANTEE
2 YEARS
COMPOSITION
composition
Foam: 100.0% Rubber; Main fabric: 100.0% Polyamide; Upper part - Main fabric: 11.0% Elastane, 89.0% Polyester; Outside shell - Secondary lining: 16.0% Elastane, 84.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Test product
Designed and tested by our team in the Basque Country, Hendaye (South-West France). The components used for this long-sleeved shorty (aka women’s spring suit) are laboratory tested to ensure the best possible quality and durability.
Warranty
2 Years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 11% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.