Men's warm waterproof fishing jacket - FJ 500 TH khaki
Store Availability
Store availability
BENEFITS
Ease of use
Attachments for pliers and landing net Large pockets to store your accessories
Lightweight
Weight size L: 1090 g
Abrasion resistance
Reinforced component in the lower back to reduce wear when fishing sat down
Warmth
Wadding filling to provide warmth and comfort down to -5°C
Windproof
Entire component windproof Tightening in the sleeves to reduce air entry
Waterproof
Waterproof component: 5,000 mm Taped seams
Pockets
5 pockets including 1 inner pocket
Breathability
Breathable fabric to wick away perspiration (R.E.T=12)
TECHNICAL INFORMATIONS
POCKETS
. 2 chest pockets with flaps and gussets for storing your boxes and accessories
. 2 pockets with zips and fleece lining to protect your hands from the cold
. 1 inner pocket with zip for your personal belongings
FEATURES
. A fleece-lined adjustable hood. An attachment ring to safely store your pliers or scissors + storage strap
. A rear loop to hang your landing net
. Cuffs with muffs to reduce air entry + tightening system
. Reinforced lower part of the jacket for greater abrasion resistance when fishing sat down
CUT
Quite loose which allows you to be at ease and fits every size
WATERPROOFING WATER COLUMN TEST (known as the Schmerber test)
The strength of a fabric is measured in water pressure, expressed in mm water column (test based on the JIS 1092B standard). The greater the pressure, the more the fabric is waterproof.
With a waterproofing index of 5,000 mm, our 500 thermal jacket is highly waterproof.
Fabrics with a waterproofing index of 5,000 mm withstand a pressure of 0.5 bar.
WATERPROOFING SHOWER TEST:
In our eyes, this test reflects real-life conditions the best because products designed with a waterproof fabric could let in water through the seams, flaps or zips.
In the test, the products are put under a shower in order to test their overall waterproofing capacity.
Our 500 thermal jacket protects you from a heavy downpour (12 cm of rain in 2 hours)
BREATHABILITY RET TEST
The breathability is measured by the Water-Vapour Resistance (Ret) coefficient. It measures a fabric's resistance to wicking away moisture. The lower this resistance (and therefore the coefficient), the more breathable the fabric. (test based on the ISO 11092 standard).
Our 500 thermal jacket has an index of 12 and is therefore breathable and perfectly suited for use during moderate exertion
COMPOSITION
Waterproof polyester component reinforced in the lower back with a 300-denier abrasion-resistant polyester component
COMPOSITION
composition
Main fabric: 100.0% Polyester; Yoke: 100.0% Polyester; Padding - Inner fabric: 100.0% Polyester; Lining: 100.0% Polyester; Hood lining: 100.0% Polyester; Sleeve lining: 20.0% Elastane, 80.0% Polyamide; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store in a dry place and avoid putting them on a heat source such as a radiator, as it could damage the membrane or breathable coating.
TESTS AND WARRANTY
Test product
Our jackets have been tested in a range of conditions to ensure their resistance. They have also been subject to a number of mechanical tests in the lab, including shower tests to confirm that they are waterproof in different types of rain and tests undertaken in a cold chamber to verify their thermal insulation.
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 83% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
Material
Recycled polyamide
Product made from 1% recycled polyamide
Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 38%.