Wide anti-slip snowboard pad
Store Availability
Store availability
BENEFITS
Anatomic design
Stick the 4 pads as you want to adapt it to your sole.
Compact design
Dimensions: 16.5 x 10 x 0.55 cm. It comes in 4 parts so you can make it bigger
Traction
Wide structured surface for maximum boot grip on the pad.
Grip
Wide surface and 3M Scotch tape for a good bond between the pad and the board.
TECHNICAL INFORMATIONS
Advice on gluing the pad to the board
Absolutely make sure that you spend 4 minutes sticking the pad down properly.
1. Before gluing, clean the board well with a damp sponge and soap or dish soap to degrease it.
2. Rinse thoroughly to remove any soap.
3. Dry with a cloth.
4. Stick the pads where you want them, near the rear binding.
Choice of the position of the pads
Place the 4 pads where you will put your foot when you take the chairlift. Before gluing, think about simulating a chairlift ride to find the area where your back foot is to be positioned. Warning! Do not glue the pads within 4 cm of the screw inserts, otherwise you will no longer benefit from the maximum setting of the bindings.
COMPOSITION
composition
Bed base: 100.0% Ethylene Vinyl Acetate
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Warranty
2 Years