Insulated Stainless-steel Hiking Bottle MH900 0.7L, Rapid Opening Cap

How has the insulation of the MH900 isothermal bottle been validated?

We use double stainless-steel wall technology with a vacuum between to block thermal exchange via conduction or convection. To block exchange by thermal radiation, a fine layer of copper covers the outside of the inner wall.



The fuller the bottle is, the better it is at keeping its contents hot or cold.

Be careful when using hot liquids - the flask is extremely well insulated, so liquids will remain hot for a long time.

How to optimise the performance of your MH900 isothermal flask

This isothermal bottle has been tested in the lab, according to an experienced protocol by our engineers.

- Protocol:

1. Rinse the bottle with boiling water.

2. Fill it completely with water at 95°C. Close it.

3. Leave it in an ambient temperature at 23°C for 24 hours.

4. Measure the drop temperature of the water after 6 hours, 12 hours and 24 hours.

- Performance: starts at 95°C | after 6 hr = 81°C | after 12 hr = 72°C | after 24 hr = 58°C.

What are the features of the MH900 isothermal bottle?

You can open the quick-release cap with one hand by lifting the white latch. You close it by pressing the latch down or by screwing the cup back on.

A removable tea filter is attached to the cap. Simply pull on it to separate it from the cap. Be aware that if you remove the filter after immersing it in hot water, it may be boiling hot to touch.

The cup screws onto the bottle, making it easy to carry around, and is made from double-walled stainless steel with no vacuum.

What are the weight and dimensions of the MH900 isothermal bottle?

Volume: 0.7 L

Available in several sizes: 0.4 L (reference 8641548) | 0.7 L (reference 8641550) | 1 L (reference 8750954)



Cup: 20 cl | 90 g | Ø 8 cm x 5.5 cm

Cap: 30 g | Ø 4.5 cm x 6.2 cm

Filter: 15 g | Ø 2.8 cm x 7.3 cm

How to look after your MH900 isothermal bottle

Before first use, wash and rinse the entire product 3 times.



For optimal washing and drying:

1. Separate all parts;

2. Wash them with soapy water by hand (a fine brush for) or dishwasher safe;

3. Rinse them in clean water;

4. Leave to dry separately, the cap should remain open when drying.



In the event of odours, leave the bottle to soak for a night in a water bottle and vegan bicarbonate.

What are the regulations regarding the materials of the MH900 isothermal bottle?

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force. We have chosen to use 18/8 (304) stainless steel for the flask's body, recognised for its food safety, and for the top, a heat and shock resistant polypropylene.

Can the MH900 isothermal water bottle be repaired?

Our water bottles are great solutions when going on a hike.

Over time, some parts may wear out or break.

To make repairs easier, we keep a stock of parts (tent poles, guy lines, etc.) so that these can be easily replaced.

Find all the information in the after-sales card.

Don't throw away, repair!