Isothermal Flask MH100 (s/steel double wall with air gap) 0.75 wide opening Red
Store Availability
Store availability
BENEFITS
Easy to maintain
Easy to clean thanks to the screw top. Stainless steel internal wall.
Easy to use
Screw cap with hinged handle, wide opening. Stainless steel body. 420 g.
Durability
Double stainless steel int. wall con.18/8 (304) with an air gap between the two.
Insulated
Starting temperature 95°C: 75°C after 6 hours. Be careful with hot liquids.
TECHNICAL INFORMATIONS
Advice to maximise the performance of your isothermal bottle.
The fuller the flask, the better it is at keeping the contents hot or cold.
Be careful when using hot liquids, the flask is extremely well insulated, liquids will remain hot for a long time!
We use a double stainless wall with a vacuum between to block thermal exchanges by conduction or convection. To block exchanges by thermal radiation, a fine layer of copper covers the outside of the inner wall.
Functions
The flask has a wide opening (6 cm) for easy filling, especially with ice cubes. The cap opens easily by unscrewing it. It has a hinged handle for easy carrying and storage. The flask also has a small watertight slot for your infused tea bags for example, or to store food sachets or supplements.
Care tips
Dishwasher safe (top + body) Be careful not to lose the top seals. Dry with the top off. The flask can be taken apart by hand for complete cleaning, just make sure to remember how to put it back together.
First use
Rinse the entire product 3 times with clear water before using for the first time.
Materials and regulations
Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.
We have chosen to use 18/8 (304) stainless steel for the flask's body, recognised for its food safety and for the top, a heat and shock resistant polypropylene.
Weight and dimensions
Volume: 0.75 L litre
Dimensions: Ø 7.8 cm x 24.5 cm
Weight: 420 grams (Body 337 grams and top 83 grams)
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
COMPOSITION
composition
Bottle body: 100.0% Stainless Steel; Plug: 90.0% Polypropylene, 5.0% Silicone, 5.0% Acrylonitrile Butadiene Styrene
Tips for storage and maintenance
Storage tips
Wash and dry before storing away. Store in a clean, dry place.
Restrictions on use
Do not put in a microwave oven or freezer.
TESTS AND WARRANTY
Test product
This isothermal product is tested according to the following protocol: Water at 95°C is placed in the product, which is closed and placed in an oven at 20°C. The drop in temperature of the water is then measured after 6 hours and reached 75°C. 64°C after 12 hours, 49°C after 24 hours.
Warranty
5 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.