INFLATABLE STAND-UP PADDLE RACING BOARD | RACE 12'6" FEET 26 INCHES
Store Availability
Store availability
BENEFITS
Compact design
Dimensions folded in the bag (75x45x30 cm). Inflates to 17 psi in 6 minutes
Easy transport
10.5 kg. Transport backpack, 3 large handles. An elastic bottle holder
Glide performance
Hydrodynamic shape: streamlined shape, semi-rigid nose and tail.
Rigidity
Carbon fibre stringers on/under the board for greater rigidity when inflated
Robustness
Reinforced woven dropstitch construction: robust, resistant and repairable.
Stability
Narrow (26") and solidified by a stringer for a good speed/stability balance.
User comfort
Grooved and density-variable pad to provide comfort and grip
TECHNICAL INFORMATIONS
Inflating & deflating the stand-up paddleboard
INFLATION
The sup is equipped with a new-generation valve to guarantee even more security.
To inflate your SUP, open the cover and connect the pump (“IN” mode).
Inflate to 17 psi for best results.
Disconnect the pump and close the exterior cover
DEFLATING
Turn the cover a quarter clockwise (“out” mode).
Roll up starting from the side opposite to the valve to remove all the air to completely fold
Close the cap
TECHNICAL DIMENSIONS
INFLATED SUP:
Length: 12'6" (381 cm)
Width: 26" (66 cm)
Thickness: 6" (15 cm)
Volume: 270 litres
Weight: 10.5 kg (+/- 10%) - empty weight without equipment
Note: The dimensions can vary slightly depending on the inflated pressure.
BAG CONTAINING THE FOLDED SUP:
Height: 80 cm
Width: 45 cm
Thickness: 30 cm
Weight in use
This sup board was designed and optimised for intermediate paddlers between 50 kg and 80 kg for a good compromise between speed and stability.
However, stability is a notion relative to one’s level and the conditions (flat water, sea, river, etc.). The weight is thus illustrative. Don't hesitate to ask to try out the product.
For one person. the maximum recommended weight is 110 kg.
Repair
We have a stand up paddleboard repair kit, reference 8512384.
We recommend that you contact the workshop of your local store for all repairs.
Fin
Plastic fin available through the after sales service and online in the event of breakage or loss (red: 8609360).
You can also upgrade your product with a sup carbon racing fin (ref 8545438)
Accessories
Included with the board:
- a carry bag
- a camera mount on the nose
- a 10’ coiled leash
- 1 US box fin
- 2 repair patches
- 1 instruction manual
Paddle and pump not included; please visit our website to find the right equipment for you
COMPOSITION
composition
Bladder: 60.0% Polyvinyl Chloride, 40.0% Polyester; Foam: 75.0% Polyethylene, 25.0% Foamed EVA; Carry bag: 100.0% Polyester
Tips for storage and maintenance
Storage tips
Store deflated and flat out of sunlight, after removing the fin. If storing inflated, release some of the pressure and store in a flat position without any load.
TESTS AND WARRANTY
Agree by
Olivia Piana, multiple sup racing world champion
Parts guarantee
Warranty: 2 years