SPF camera holder for spearfishing speargun

Included in the camera mount kit

1 angled plate with a 9 mm hold for attaching the camera

1 right-hand half casing

1 left-hand half casing

1 hand-tightened nut

1 anti-slip elastomer seal

1 stainless-steel spring / 1 stainless-steel screw shaft

1 connector specific to the SUBEA reel (ref. 8526576)

3 small stainless-steel screws for attachment to the reel

Dimensions and weight of the product

Overall dimensions = 11.5x9x5 cm

Universal configuration weight = 80 g

"Subea reel" configuration weight = 58 g

Holder plate area = 5x5 cm

Sideways offset of the angled part in relation to the tube axis = 4.5 cm

Compatibility

With its clip system, this kit can be attached to any speargun that has a round tube cross-section with an external diameter between 26 mm and 36 mm.

Also compatible with certain cuttlefish-shaped barrels

Fitting instructions - Universal clip configuration

Release the clip using the side bolt, which can be unscrewed by hand without the need for tools

Position the clip under the tube, as close as possible to the butt of the gun

Once the clip is positioned on either side of the tube, retighten with the securing bolt, ensuring that the anti-slip seal is correctly positioned between the speargun tube and the clip.

The camera holder plate can rotate 90° downwards to provide more clearance when reloading bands. Simply push and swing down.

Assembly instructions - Subea SPF 500 Reel

Unscrew the screw at the base of the plate.

Retighten the screw with the spring facing the reel connector

Remove the reel from the speargun

Screw on the reel connector using the 3 stainless-steel screws provided

Fit the reel back onto the speargun

Not included

The kit does not contain:

A waterproof camera

The casing for a waterproof camera

Attachment screws for the underside of the camera