Adult freestyle ski helmet FS 500 - black
Store Availability
Store availability
BENEFITS
Ease of use
Magnetic buckle and ski goggles can be worn underneath the helmet
Lightweight
540g in size M.
Warmth
Warm inner hat that’s removable.
Stability
Head size adjustment dial, coverage of entire head.
Ventilation
6 holes to aerate and wick away moisture.
Easy maintenance
Removable and washable inner hat
TECHNICAL INFORMATIONS
Experience
The inner hat is removable.
Without this hat, you can wear your mask underneath the helmet (wearing your usual hat).
When trying them on, specifically check it with your mask if you’re planning to wear it underneath the helmet.
The inner lining is made of EPP foam, which helps to better withstand the impacts you experience when skiing everyday.
Compatibility
Make sure you try the helmet with your goggles and hat before buying it. The strap and buckles of goggles vary in thickness from one brand to another. The same is true for hats, there are big differences in size between thin and thick hats, and this affects which size helmet you will need.
ADJUSTMENT WHEEL
The adjustment wheel plays a key role in keeping your helmet secure. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also gives you comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.
ABS STRUCTURE
This type of structure incorporates an outer shell, made of ABS, injection moulded to withstand powerful impacts. It combines durability with a significant capacity to withstand bumps and knocks. The inner EPP foam liner absorbs impact in the event of a collision. We recommend changing your ski helmet at least every 5 years unless it has sustained a significant impact in the meantime.
EN 1077 Standard
Standard EN 1077 is a European standard that applies to helmets used for cranial protection during downhill skiing and snowboarding. This standard tests the ability to absorb shocks and resistance to penetration. There are 2 categories:
- Class A: protects the top and back of the head, as well as the ears and the side of the head
.- Class B: Protects the top and back of the head but does not cover the ears.
How do you choose your helmet?
* Measure your head’s circumference in centimetres (around the middle of the forehead and just above the ears).
* Choose the size that covers this measurement.
Example: if you have a head circumference of 56 cm, you should try a helmet in size 55-59 cm.
FITTING
Take plenty of time to try it on properly. You shouldn't feel any areas of discomfort. If you do then try another model. Always try your helmet with your mask, because not all helmets go with all masks. A helmet is compatible with a ski mask when there is no air space between the top of the mask and the helmet.
Adjusting the helmet
During practice, the ski helmet must be properly fitted and adjusted:
* It is essential to choose the right size.
* The head circumference must be adjusted using the thumb wheel.
* The chinstrap must be properly adjusted.
It's a bit like the seat belt in a car: if it’s too loose, it will not perform its function and you will be less protected.
Return terms and conditions (Specific product: personal protection equipment)
Make sure this product is right for you.
Otherwise, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging.
COMPOSITION
composition
Foam: 100.0% Polypropylene; Shell: 100.0% Acrylonitrile Butadiene Styrene; Main lining: 100.0% Acrylic; Webbing: 100.0% Polypropylene
TESTS AND WARRANTY
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 19% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.