Men's 3-in-1 Waterproof Travel Trekking Jacket Travel 900 Warm -15°C - black
Store Availability
Store availability
BENEFITS
Anatomic design
Cuff adjustment system to tighten them as needed.
Modularity
3-season jacket for taking on many different climates.
Robustness
Woven fabric for better resistance.
Warmth
Thermal modularity: comfort down to -15°C. Removable inner padded jacket.
Weight
This jacket weighs approximately 1.2 kg in size L.
Waterproof
Membrane: 15000 mm H2O (Schmerbers). 3-hour storm. Fully taped seams.
Pockets
1 hidden pocket to keep your belongings safe + 2 hand pockets.
Instructions
DownloadTECHNICAL INFORMATIONS
3-in-1 concept for adapting to every situation
With the "3-in-1" system, the jacket will be ideal for cold conditions (down to -15°C) and for hot weather trips, because you can leave the inner layer at home and wear the rain jacket by itself.
You can also use the inner padded jacket on its own, as an intermediate layer over a T-shirt and sweater.
With just one jacket, you have 3 possibilities!
A durable jacket thanks to its good abrasion resistance…
We test our fabrics in the laboratory based on various criteria including abrasion resistance.
To replicate the friction caused by the backpack straps, we perform a standardised Martindale test which involves rubbing the material of the jacket against another abrasive material. The aim is to measure the point at which the product starts to become worn & the pilling begins. The jacket easily passed the test reaching 20,000 cycles, which is above the average for the other jackets on the market.
... as well as good tear resistance
The jacket was also subjected to single rip tearing tests. The aim is to reproduce in a laboratory the effect of your jacket snagging on something outdoors and being ripped.
Using this test protocol, we check that the fabric doesn't rip any further after a hole is made in the fabric, so that it can still protect you for years to come.
COMPONENT WATERPROOFING OF THIS JACKET
The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Main lining: 100.0% Polyester; Padding: 100.0% Polyester; Secondary lining: 100.0% Polyester; Cuff: 78.0% Cotton, 3.0% Elastane, 19.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Test product
This jacket was first tested in the laboratory, on a whole set of factors (warmth, waterproofing, durability). It was then tested by a small panel of users, at the heart of our global development centre, to assess the comfort, fit and practical features. Finally, it was validated in the field by volunteer-customers and users, as part of a test mission, just like a large number of Decathlon's products (check out our website)
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 87% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.