27.5" x 1.90/2.50 Self-Sealing 48 mm Schrader Inner Tube
Store Availability
Store availability
BENEFITS
Compatibility
27,5" tyres with a cross section of 1.90 to 2.50. Schrader valve ETRTO 47/64-584
Puncture resistance
The liquid in the inner tube seals small punctures (< 3mm).
Lasting air retention
Optimised composition to ensure your inner tube has a good seal.
TECHNICAL INFORMATIONS
How to choose your inner tube
Check all the information indicated on the sidewall of the tyre (diameter and width). For example, 27.5 x 2.00 means a tyre with a 27.5-inch diameter that is 2.00 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units.
For example, 50-584 means that the tyre is 50mm wide with a 584mm internal diameter (approx. 27x2.00).
Removing an inner tube
Remove the old inner tube using a DECATHLON tyre lever.
Checks to carry out before installing an inner tube
Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip.
A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube
Mounting the inner tube
Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.
Mounting the tyre
Start by mounting the tyre onto the wheel on the opposite side to the valve.
Finish mounting the tyre at the valve to avoid pinching the inner tube.
Never mount your tyre with a screwdriver or a tyre lever, as you risk pinching and puncturing the inner tube.
Inflating the tyre
Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.
Tip from the pros
To prevent any puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.
Weight:
430g
COMPOSITION
composition
Main part: 10.0% Brass, 90.0% Isobutylene Butyl Isoprene Rubber
Tips for storage and maintenance
Storage tips
Carry your inner tubes in a container to protect them from getting punctured (tool drum, original packaging…).
Restrictions on use
Not suitable for use on the sides of your tyres
TESTS AND WARRANTY
Test product
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.
Warranty
2 Years