16 x 1.5/1.9 Self-Repairing Schrader Inner Tube

How to choose your inner tube

Check all the information indicated on the sidewall of the tyre (diameter and width). For example, 16 x 1.50 means your tyre is 16 inches in diameter and 1.50 inches wide.

On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 38-305 means a tyre that is 38mm wide and has an inner diameter of 305mm (approx. 16 x 1.50).

Removing an inner tube

Remove the old inner tube using a DECATHLON tyre lever.

Checks to carry out before installing an inner tube

Check the condition of your tyre and replace it if necessary.

Make sure no objects are lodged in the tyre.

Check the condition of your tyre rim strip.

A rim strip that is even slightly bent can cause punctures.

Check that your rim does not have any other issues that could damage your inner tube.

Fitting your inner tube

Watch our video before you start.

Pre-inflate the inner tube slightly to avoid pinching.

Insert the valve, making sure you are using the correct valve for your rim.

Put the inner tube entirely inside the tyre so that it fits inside the rim.

Take care not to pinch the inner tube when fitting.

Mounting the tyre

Start by mounting the tyre from the opposite side of the valve

Finish at the top of the valve to avoid pinching

Never use a screwdriver or tyre lever to mount the tyre or you could pinch the inner tube and puncture it.

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).

Regularly check that your tyre is in the correct position as you inflate it.

Tip from the pros

To prevent any puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.

Weight:

195 g