Women’s Warm and Waterproof Ski Trousers FR500 - Pink
Store Availability
Store availability
BENEFITS
Freedom of movement
Loose fit and stretch component that follow all your movements
Visibility
Recco® system to facilitate the search in the event of an avalanche.
Warmth
Glued warm pads (100 g/sqm wadding) protect you moderately where needed
Waterproof
15,000 mm membrane (Schmerbers) and taped seams, waterproof zip
Pockets
Two thigh pockets including one mesh pocket for a phone or avalanche transceiver
Breathability
The membrane, placed heat pads and ventilation help wick away perspiration
Snow reduction
Gaiter at the hem of the trousers High elasticated waistband for good protection
Ventilation
2 wide vents along the thigh to reduce the temperature after your runs
TECHNICAL INFORMATIONS
Warmth and breathability technology
Placed heat pads to provide good thermal protection during your freeriding outings.
This technology reserves a large area where the 3-layer membrane component can eliminate your perspiration more effectively.
A perfect compromise between completely padded trousers and 3 layer trousers with no extra warmth.
Warmth and modularity support you on your Freeride runs throughout the season.
Additional features
Wide elasticated waistband to guarantee: perfect airtightness against draughts and snow, perfect support and constant, regular warmth in the lower back.
Ventilation
To stay dry, it is important to wear waterproof trousers. But you shouldn't end up wet with perspiration.
The vents play an important role in wicking away perspiration.
This is why we equipped these trousers with 2 zipped air vents and two large zips under the arms (28 cm in size L).
Water repellency
The water-repellent property of a fabric is its ability to make water run off its surface without absorbing it. This prevents the fabric from becoming waterlogged and remains light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.
Component waterproofing
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 10,000 mm is therefore resistant to the pressure exerted by 15,000 mm of water
Breathability of a component
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability.
For example:
RET < 9 = extremely breathable fabric
9 < RET < 12 = very breathable fabric
12 < RET < 20 = breathable fabric
RET > 20 = little or no breathability.
What is a membrane or coated component?
The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more resistant and often more breathable than a coating.
How do we make a garment waterproof?
The waterproof properties of the garment are related to its fabric, seam sealing and assembly design.
We then carry out shower tests on our garments.
Waterproofness/Shower test
This garment has been validated in a shower test under 100 L of water / sqm / hour for 3 hours. This test reproduces the conditions of a heavy mountain storm.
How do we make a garment breathable?
In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.
Your product is repairable
This product is repairable.
We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store.
If, however, we can’t repair your product (non-repairable production defect), you can exchange it or get a refund.
What is the RECCO® system?
All our Freeride and All-Mountain jackets and trousers are equipped with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is equipped with RECCO® reflectors and is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
Tutorial on how to wash your waterproof garment
We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment.
Link: https://youtu.be/rh4GLwALgBM
After three washes, restore the water repellent properties with a waterproof spray or wash-in product.
To help you choose the right size
The model on the photo is wearing a size M and measures 175 cm.
Measurements:
Chest measurement: 92 cm
Waist measurement: 66 cm
Hip measurement: 89 cm
COMPOSITION
composition
Main fabric: 100.0% Polyester; Padding: 100.0% Polyester; Main lining: 100.0% Polyester; Yoke: 97.0% Polyamide, 3.0% Polyester; Secondary lining: 10.0% Elastane, 90.0% Polyester; Membrane: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry this waterproof protective garment thoroughly before storing it.
Restrictions on use
A second layer is essential for good thermal comfort.
TESTS AND WARRANTY
Test product
Our team of designers is based at the foot of the Mont-Blanc, near many ski resorts in Haute-Savoie (France). All year round, we create and develop products that are simple and technologically advanced. These are then ruthlessly tested in the field, because we believe that the only way to continuously improve our products is to test them under the real-life conditions that you will experience in use.
Warranty
2 Years
Agree by
A team of customers, Decathlon staff and ambassadors, all freeride skiers, has tested and validated the features of these trousers.