100 COMPACT 8FT (S) INFLATABLE STAND-UP PADDLEBOARD - YELLOW/WHITE (up to 60kg)
Store Availability
Store availability
BENEFITS
Compact design
This incredibly compact board fits into a small 30 L backpack
Easy transport
Ultra compact: take it anywhere on your back, on foot, on your bike or skateboard...
Weight
6 kg! Lightweight and easy to handle, from carrying in your bag to launching.
Stability
Designed for a maximum weight of 60 kg. Maximum load for buoyancy: 180 kg
User comfort
Foam deck for comfort and grip. Split in half for folding
Instructions
DownloadTECHNICAL INFORMATIONS
Recommended user weight and maximum load
Recommended user weight:
Less than 60 kg: Ideal board for easily getting into stand-up paddleboarding on calm bodies of water.
60 to 80 kg : We recommend the larger size (M/9') for more stability.
Over 80 kg: this model is not designed for you; we recommend the larger size (L)
Maximum load to stay up out of the water = 180 kg.
Inflating & deflating the Stand Up Paddleboard
INFLATING:
The SUP is equipped with a new-generation valve to guarantee even more security.
To inflate your SUP, open the cap and connect the pump (“IN” mode).
Inflate to 15 psi for best results.
Disconnect the pump and close the outer cap.
DEFLATING:
Turn the cap a quarter clockwise (“OUT” mode).
Roll, starting from the opposite side to the valve to remove all the air for tight folding.
Close the cap.
To ensure optimal space efficiency, follow our folding method
Fully deflate the board
Roll up the product a first time to expel the air through the open valve.
Unroll the board and lay out flat. Fold it lengthways with the fin bases positioned outwards.
Roll up from front to back.
Use the compression strap to keep it rolled up and help you fit it into the bag.
For more details, check out our videos online available on the product page.
Fins and fin bases
2 118 mm fins for paddling in shallow water.
Available through customer service and online in the event of breakage or loss (8502106).
Remember to remove the fins once you get out of the water.
For your safety, protect your hand if you need to apply force to the rear of the fin to remove it in the event of blockage with sand.
If possible, rinse the bases of the fins before and after using the stand-up paddle board for easier fin installation and removal.
Technical dimensions
INFLATABLE BOARD:
Length: 8' (244 cm)
Width: 30" (76 cm)
Thickness: 5" (12.5 cm)
Volume: 187 litres
Weight: 6 kg (±10%)
When folded:
Height: 48 cm
Width: 31 cm
Thickness: 19 cm
Our boards can be repaired!
We have a stand-up paddleboard repair kit, reference 8512384.
We recommend that you contact the workshop of your local store for all repairs.
We can repair bases of the fins, handles, valves and significant leaks
Leash
Very lightweight leash that you won't even know is there during use and is easy to store.
Always wear your leash to stay attached to your board if you fall.
To avoid damaging the leash and leaving marks on your folded board, remove and rinse after each use.
This leash attaches to the ankle.
PLEASE NOTE: don’t use the leash on the river.
Bag contents
Storage backpack
Board
Fins X2
Leash
Instructions
Repair patch
Recommendations for use
We recommend:
Using a buoyancy aid jacket (reference 8501295) or a buoyancy aid belt (reference 8600104)
Not suitable for paddling further than 300 m from shelter.
Don’t use the leash on the river.
Notify someone of your trip and your whereabouts.
Research to find out if there are any local navigation rules that apply to the location of your trip.
Compact board storage
Store deflated, flat and out of sunlight, after first removing the fin and leash. If storing inflated, release some of the pressure and store in a flat position without any load.
Excluding transport, you don’t need its extreme compactness, preferably storing it inflated or rolled lengthways.
COMPOSITION
composition
Board for surf: 70.0% Polyvinyl Chloride, 30.0% Polyester; Floor mat: 25.0% Ethylene Vinyl Acetate, 75.0% Polyethylene; Carry bag: 100.0% Polyester
Tips for storage and maintenance
Storage tips
Roll up and the product once completely dry and store in its bag for long-term storage.
Restrictions on use
Not suitable for paddling further than 300 m from shelter.
TESTS AND WARRANTY
Parts guarantee
2-YEAR guarantee. Availability of spare parts essential to the use of the product: 10 years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 29% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.