SKI TOURING BINDING WITH SKI BRAKE - TOUR FREE

Using the binding when going uphill

Hold the front of the boot at a slight angle, and once the metal holes on the boots are opposite the binding pins (metal cones), apply pressure. The binding is clipped at the front.

When climbing:

- Lift the black plastic part up to lock your binding.

- Turn the heel pad to avoid clipping in the back of the boot.

- Turn the heel pad to find the correct heel lift.

Using the binding when going downhill

Hold the front of the boot at a slight angle, and once the metal holes on the boots are opposite the binding pins (metal cones), apply pressure. The binding is clipped at the front.

When descending:

- Leave the black plastic part down so that it can be triggered in the event of a fall.

- Turn the heel pad to clip the back of the boot.

- Clip in with a sharp movement.

Binding release standard

Warning, many cross-country ski bindings are not standardised.

The binding releases with a spring.

The standard follows the DIN scale.

In theory, an 80 kg skier will adjust their binding to the number 8 graduation. In reality, they will have to take into account their skiing level, physical fitness and snow conditions.

Adaptability

Bindings sold with ski brake. This binding can be screwed onto skis with a maximum width of 92mm.

Compatible with Dynafit or Wedze crampons.