1 snowboard binding disc + 4 screws (16 mm)

Description

_ 1 compatible disc on your board with: the 4x4 inserts and the "Chanel" system by Burton,

_4 16mm screws

_4 washers.

WARNING: for the Chanel system by Burton, check the length of the screws = do not let the screws stick out of the Burton insert when they are tightened on the disk + washer.

If they do,

_you may irreversably damage the sole of your board.

_using 2 washers may be the solution. Check each board carefully.

Compatible with the screws

Compatible with all Decathlon/Wed'ze bindings, even if your original disc is different.

WARNING: The disc is only compatible with Decathlon/Wed'ze bindings.

The diameter of the disc, the sizes or the notch distribution, etc., vary according to the brand.

External diameter of the disc: 99 mm / Internal diameter of the disc: 88 mm / thickness 10 mm.

1 notch = 3° angle.

Compatible with the board

This disc lets you mount Decathlon bindings (Wedze or Dreamscape) on all boards

_ 4x4 inserts

_ 4x2 inserts

_ Burton Channel with the outermost 2x3 holes

Why is there only one disc, not a pair of discs?

This repair kit is provided in case a screw gets lost or the disc gets broken. The likelihood that you will break both discs at the same time or that you lose more than 4 screws is extremely low.

That's why this kit has been kept to a minimum, in order to keep your repair costs low.

Tools needed

a PZ3 screwdriver for the 4 fixing screws

Compatibility with Burton Channel boards

The Burton snowboard brand has its own system for mounting bindings: the Channel. The binding is screwed onto 2 mobile inserts present when purchasing the board.

Our disc allows this binding to be mounted on the channel, because the holes make such mounting possible.

On the other hand, the screws supplied with our discs are not compatible in diameter. The Burton insert is also different from the rest of the market. You’ll need to buy Burton screws.