Swimming goggles SOFT - Clear lenses - Size small - Pink turquoise
Store Availability
Store availability
BENEFITS
Anti-fogging
Swim with fog-free goggles – these swimming goggles have an anti-fog treatment.
Field of vision
Enjoy one of the best fields of vision in our range of goggles.
Stability
These soft swimming goggles give you excellent stability.
Sun protection
Lenses filter more than 99% of harmful UVA and UVB rays to protect your eyes.
TECHNICAL INFORMATIONS
REDUCE FOG IN YOUR SWIMMING GOGGLES
Fog develops due to several factors: a difference in temperature between the body and the water, humidity levels, etc. Wear due to friction is one of the main causes.
If your goggles fog up, dip your lenses in the water and a protective film will reform.
After a certain amount of time, it is normal for the performance of the anti-fog coating to be diminished.
We provide an anti-fog marker that reactivates an ageing anti-fog treatment and which makes your goggles last longer.
CHOOSING THE SIZE OF YOUR SWIMMING GOGGLES
How watertight swimming goggles are depends on how well the seals adapt to fit the shape of the face. Before purchase, we advise you to do the "suction" test with your goggles without the elastic strap:
If the goggles stay on your face by themselves, with slight suction, the product will be watertight during your swim. This also enables you to spot any areas of discomfort or annoyance when the model is on your face.
This model is available in sizes S & L(narrow & rounder faces).
ADJUSTING YOUR SWIMMING GOGGLES
These swimming goggles fit the morphology of your face without needing to be over-tightened.
Goggles that are too tight can cause discomfort, leave marks and even create water inlet holes.
It is not necessary to press against the lenses with your hands, a light suction effect is usually enough for swimming sessions without water inlet holes.
The straps ideally should rest 2 to 3 cm above your ears. This position will optimise the grip and comfort of the goggles.
LOOKING AFTER YOUR SWIMMING GOGGLES
We advise you to:
- Rinse your goggles (only if necessary) by dipping them in the water
- Avoid water jets directly on the inner face of the lenses
- Store the goggles in their case between sessions to avoid damaging the lenses (on the inner face to protect the anti-fog treatment, on the outer face to avoid scratches)
- Avoid exposing the goggles to temperatures over 60 °C
- Do not touch or wipe the inside of the lenses
UV PROTECTION
Complies with standard: Q/BT 4734 -2023, all Nabaiji swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint.
Looking directly at the sun is dangerous and can lead to irreversible eye damage.
COMPOSITION
composition
Lens: 100.0% Polycarbonate; Frame: 100.0% Thermoplastic Polyethylene; Buckles: 100.0% Polycarbonate; Strap: 100.0% Silicone
Tips for storage and maintenance
Storage tips
After use, store the goggles in their case or plastic pouch. <br /> Important: Do not touch the inside of the lenses to avoid damaging the anti-fog treatment.
Restrictions on use
Don’t touch the inside of the goggles (damages anti-fogging).
TESTS AND WARRANTY
Test product
These goggles were approved by beginner swimmers who used them in a Nabaiji mission test in 2019 in Antibes, France. The Nabaiji swimming goggles comply with the EPI regulation 2016/425. Our products are tested and approved by independent laboratories. Goggles intended for swimming at the surface
Warranty
2 Years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 50% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.