Men's City Cycling Warm Rainproof Jacket 540 - Blue
Store Availability
Store availability
BENEFITS
Visibility
Be seen at night from 50 m away, 360°, thanks to the reflective bands.
Adjustable
Place the hood over or under your helmet, or tucked into the collar.
Warmth
Stay warm thanks to the wadding (filling) designed for above-zero temperatures.
Windproof
Coated fabric keeps the wind at bay.
Waterproof
Stay dry in the rain for 1 hours with this waterproof jacket & its coated fabric
Pockets
Carry your belongings safely in the 3 zip-up pockets.
Ventilation
Stay nicely ventilated thanks to the zipped openings under the arms.
TECHNICAL INFORMATIONS
NIGHT-TIME VISIBILITY
This PPE-certified cycling jacket comes with reflective strips and a reflective magnetic flap on the front for visibility at night.
The reflective parts have been positioned based on the constraints of cycling (leaning forwards, wearing a backpack, signalling with your arm) to guarantee 360° visibility at night from up to 50 m away when picked up by car headlights.
SHAPE DESIGNED FOR CYCLISTS
Its shape covers the lower back, arms, neck and wrists while cycling, providing excellent protection from the rain and wind.
Ribbed cuffs to stop air getting in.
There are vents under the arms to help air circulate. Equipped with 2 hand pockets and an external chest pocket with a zip fastening for added security.
The hood tucks into the neck and can be worn over your helmet or without your helmet if you're walking.
WATERPROOFING
The fabric's coating and sealed seams guarantee waterproofing. The resistance of a fabric to water pressure is expressed in mm of a water jet (test based on standard ISO 811). The higher the pressure, the more waterproof the fabric. Our fabric can resist the pressure from 2000 mm of water - 2000 schmerbers (the equivalent of a rain shower lasting around 1 hour, or 6 cm of rain in 1 hour), even after 5 washes.
COMPONENT BREATHABILITY
Hydrophilic coating RET=12 which limits condensation inside the garment. To see whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower its resistance, the more the fabric lets water vapour produced by the body escape, and the more breathable it is.
For example: RET < 9 = extremely breathable fabric. 9 < RET < 12 = highly breathable fabric. 12 < RET < 20 = breathable fabric. RET > 20 = slightly or not breathable fabric.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Padding: 100.0% Polyester; Cuff: 3.0% Elastane, 97.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Always make sure that this protective, waterproof garment is completely dry before putting it away. Store on a hanger in a clean, dry place.
Restrictions on use
You will not be visible at night without a light source.
TESTS AND WARRANTY
Test product
This product has passed a shower test under 60 L water/sqm/hour for 1 hour. This test reproduces the average conditions of a small shower.
Warranty
2 Years
Agree by
This jacket is an item of personal protective equipment (PPE) that makes the cyclist more visible. It has been tested for compliance with CE standards by a notified body: SGS Fimko, no. 0598, Takomotie 8, 00380 Helsinki, Finland. The EC type test was performed on the basis of the requirements of standard NF EN1150 for category 2 PPE
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 100% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.