WOMEN’S WARM SKI TROUSERS 180 - WHITE
Store Availability
Store availability
BENEFITS
Anatomic design
Adjustable leg length with press stud and rip-tab adjustable waist
Water repellent
Water-repellent outer fabric that does not get waterlogged.
Adjustable
Loops for straps inside the waistband.
Warmth
60 g/sqm wadding. Brushed polyester lining, comfort temperature -9°C.
Waterproof
5,000 mm membrane (Schmerbers) and partially taped seams.
Pockets
2 hand pockets with zip fastening.
TECHNICAL INFORMATIONS
Straps
If you're looking for better support on the shoulders, you'll find loops for adding straps inside the waistband of the trousers. The straps can be found on our website under reference 8751391
What components are used to give my trousers warmth?
To keep you warm, we use insulation made from wadding (60 g/m²). This synthetic polyester-based wadding traps more or less air, depending on the size of its fibres, to insulate you from the cold.
How is comfortable temperature measures?
We lab-test each of our products so that we can provide you with a indicative value on the item's comfort. This comfort indicator is measured without tights for trousers, and with a thermal t-shirt and a fleece for jackets. The measurement indicated is that of the external temperature in which the testers are neither warm, nor cold. Of course, this perceived temperature varies in line with the intensity of the activity and the metabolism of the individual.
How should I dress to avoid having cold legs on the slopes?
To keep your legs warm and dry, 2 layers of clothing are enough:
- 1 ski base layer to wick away perspiration.
- 1 ski trouser to protect against bad weather and provide warmth.
What is the coating?
The coating is a waterproofing material spread over the inner surface of a fabric. It prevents water from seeping into the garment but allows the water vapour produced by the body's physical activity to escape. So you stay dry for greater comfort while practising your sport.
How is the waterproofness of your trousers measured?
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. This component has a waterproof rating of 5000mm is therefore resistant to the pressure exerted by a 5000mm column of water.
For skiing, we advise components rated 3000 to 20,000 mm.
Plus, here at Decathlon, we lab-test all of our waterproof products. This product has a score of 2/5.
How can I prevent snow from getting into my trousers?
The trousers have elasticated gaiters at the ankles to cover the boots. If you fall or come into contact with fresh snow, the seal created by the gaiter keeps the snow out.
How should you wash your trousers?
To optimise the performance of your trousers, we recommend the following:
* Machine wash at 30°, synthetic programme.
* Turn the product inside out.
* Add a small amount of detergent. No softener.
* We recommend you wring it by hand.
* Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Filling: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store preferably on a hanger and do not fold, as this damages the fabric. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All Wedze products are conceived, designed and developed in the Mont Blanc Valley. They are then tested under identical usage conditions to those you will encounter yourself (in the snow, cold and powder snow, etc.). The design teams make sure the programme for which the product is designed and developed tallies perfectly with its real-world use.
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessBiton
Product made from 18% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 39% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 54% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.