Kids' Ski Suit - Maroon/Navy
Store Availability
Store availability
BENEFITS
Customisation
Label on the lining for writing your child’s name.
Robustness
Buttock, knee and lower leg reinforcement component.
Warmth
Chest wadding padding 150g/sqm. Arms and legs 100g/sqm Brushed knit lining.
Waterproof
GOOD:5,000mm rated coating, 100% taped seams on buttocks.Built-in gaiters, hood.
Pockets
1 chest pocket, 1 secure ski pass pocket.
Breathability
Breathable component that helps perspiration wicking.
TECHNICAL INFORMATIONS
Wadding thermal insulation
Thermal insulation will keep your young skiers at the right temperature, neither too hot nor too cold. The garment adapts to the body's physical activity and to the outside environment. Wedze uses wadding for insulation to keep the body warm. Wadding is a synthetic component made from polyester which stores more or less air, depending on the length of the fibres. The thicker the wadding, the more air it contains and the warmer it is.
Coating treatment
The coating is a waterproof substance that's spread on the inner side of the outer suit fabric. It prevents water from seeping into the garment but allows water vapour produced by the body's physical activity to escape. This way, young children stay dry and are more comfortable.
Taped main seams
In addition to waterproof fabric, we have made this suit even more watertight by taping the seams. These are waterproof, adhesive strips taped to the inside seams of the garment to make it perfectly watertight. These taped seams are in the areas most exposed to snow. On this suit, it is the buttocks.
Durability
Because sharp skis and games in the snow can sometimes damage or cut the bottom of the ski suit, we have added high-performance reinforcements to prevent tearing. These reinforcements are on the most exposed areas: knees, buttocks and lower legs.
Ski pass pocket
No need to get your ski pass out any longer! Your sleeve has a ski pass pocket so you can access the lifts quickly.
Customisation
There is a label at the top of the back lining on which you can write your child's name to personalise the product. Handy for finding their suit after ski school, at the crèche or at school.
How should you dress your children to make sure they keep warm on the ski slopes?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule: Layer 1 or second skin, to stay dry. Layer 2 or an insulating layer, to keep the heat in. Layer 3 or a protective layer, to protect against bad weather.
How should you dress children to prevent them getting cold legs on the slopes?
To keep your legs warm and dry, 2 layers of clothing are enough:
1 skiing base layer to wick away perspiration and ski trousers (or ski suit) to protect from bad weather and provide warmth.
COMPOSITION
composition
Filling: 100.0% Polyester; Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Lower part - Main fabric: 100.0% Polyamide; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store on a hanger and do not fold as this could damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All Wedze products are conceived, designed and developed in the Mont Blanc Valley. They are then tested under the same conditions as you would experience in real-life use (snow, cold, powder snow, etc.) The design teams make sure that the programme for which the product is designed and developed, perfectly matches its use in the field.
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
17% of the fabric color is made by dyeing the yarn at the source
Dyeing textiles requires lots of water but also leads to lots of water waste generated in dyeing vats. To reduce this environmental impact, we choose solution dyeing, which integrates colour pigments when manufacturing the thread.
-
MaterialRecycled polyester
Textile part made of 53% recycled polyester
We have incorporated recycled polyester into this product (instead of conventional polyester, which is itself derived from petrochemical plastic). What does this mean? In addition to being technical, this product has been designed taking into account its environmental impact: using recycled polyester means recovering and transforming products destined to be thrown away, such as production offcuts or plastic bottles, instead of using new oil resources.