Women's Trekking 50 L Backpack MT100 Easyfit
Store Availability
Store availability
BENEFITS
Versatility
Water bottle holder, Pole holder, Rain cover.
Robustness
Thin yet durable polyester main fabric, reinforced bag base.
Multiple compartments
Split capacity, access to bottom of bag, 5 pockets
Easy hydration
Space for a water bladder (not included) is provided for easy drinking
Weight
1.6 kg.The weight indicated is that of our benchmark sample.
Carrying comfort
Carry system for the female body shape. EASYFIT automatic back adjustment.
Ventilation
Back with aluminium bars to reduce pressure and allow the back to breathe.
TECHNICAL INFORMATIONS
Dimensions
Bag dimensions when in use:
Height : 58 cm/23 in
Width: 26cm / 10 in
Depth: 25 Cm/10 in
Compatible
with 1/2 moon 2x7L storage covers Back length (= distance 7th vertebrate - ilium): Minimum: 41 Cm/16 in
Maximum: 50 Cm/20 in
The waistband:
Minimum: 74 Cm/29 in
Maximum: 131 cm / 52 in
EASYFIT system
Our patented Easyfit system allows you to adjust the back height and strap tension simultaneously by pulling on one single strap (on each side).
1. Put on your bag
2. Fasten and tighten the belt
3.Pull the straps (upwards)
And you're done!
Capacity
50 L volume. The volume of each backpack is measured using a standardised method. we use small balls to fill the main compartment as well as each pocket. The balls are then emptied into a graduated container in order to determine the equivalent volume in litres, with a margin of error of just a few %.
How to pack a backpack?
Put your bedding at the bottom. Put heavy gear (tent, camp stove, food) near your back. Store your clothing around it. A groundsheet or tent can be placed under the flap or under the bag if there isn't room inside. Keep your waterproof jacket and fleece to hand. Place small items for daily use (sun cream, map, glasses etc.) in the pockets. The water bladder can be placed in the compartment provided down the back.
Female body shape
Our women's models are adapted to their body shape (chest and hips) with a more open shoulder strap shape and a higher fitted belt for greater comfort and freedom of movement. The EASYFiT system has also been adapted to a lower adjustment range from back height.
Complementary accessories
It's important that you are well equipped for your trek to take place in the best conditions. So to complete your equipment and make your MT100 backpack easy to use, check out our storage accessories
COMPOSITION
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Yoke: 100.0% Polyester; Webbing: 100.0% Polypropylene; Bag cover: 100.0% Polyester; Coating: 100.0% Polyurethane; Foam core: 100.0% Ethylene Vinyl Acetate; Foam part: 100.0% Polyester; Comfort foam: 100.0% Polyurethane
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store your bag in a dry, ventilated place away from direct light.
TESTS AND WARRANTY
Test product
All our backpacks undergo field tests by users who are representative of our target market under similar conditions to those you will encounter. To test, assess and validate products, our mission test connects the product designer with individuals independent to DECATHLON. This backpack was tested by trekkers for 5 weeks in the Canary Islands, the Pyrenees and the Mont Blanc mountain range.
Warranty
10 Years
Agree by
Our passionate customers recruited through our platform on our website Discover trekking, rent your equipment and discover our products and our advice on our website
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessBiton
Product made from 82% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 39% compared to conventional dyeing.