WOMEN'S SKI CLUB COMPETITION JACKET 980 - BLUE
Store Availability
Store availability
BENEFITS
Water repellent
Water-repellent outer fabric that does not get waterlogged.
Freedom of movement
Mesh component for superior stretch properties.
Warmth
Brushed lining.
Waterproof
Very good: 11000 mm membrane
Pockets
3 secure pockets: 2 hand, 1 chest.
Breathability
Breathable fabric.
User comfort
Warm and soft for protection and comfort.
TECHNICAL INFORMATIONS
What type of fit is the jacket?
Slim fit. The inner volume allows this jacket to be worn with back protection and with a ski suit with arm protection.
What is a membrane and what's it for?
The membrane is a very fine component applied to the inner surface of the outer jacket fabric. This hydrophilic component prevents water from seeping in while wicking away the perspiration produced by the body. The membrane is unbeatable when it comes to staying warm and dry.
How is the water resistance of a jacket measured?
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. For example, a component with 2000 mm waterproofing resists the pressure exercised by 2000 mm of water (which corresponds approximately to a two-hour shower).
Which parts of the jacket protect me from bad weather?
This jacket is rigorously developed and assembled to help prevent water from entering and to feel the wind less, to help you cope with bad weather.
Why is water-repellency needed?
The water-repellent property of a fabric is its capacity to allow water to run off its surface without seeping in. This jacket is made from water-repellent materials that prolong its resistance to bad weather. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.
How to restore the water-repellent properties ?
Bear in mind that the water-repellent feature can be reactivated. To do this, put the jacket in the dryer on a synthetic programme for 10 to 15 minutes.
You can also use a waterproof spray (sold in our stores).
This product is repairable
This product is repairable. We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. However, if we can't repair your product (production defect), we will exchange it or reimburse you.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Lining: 24.0% Elastane, 76.0% Polyamide; Membrane: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store preferably on a hanger and do not fold, as this damages the fabric. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All Wedze products are conceived, designed and developed in the Mont Blanc Valley. They are then tested under identical usage conditions to those you will encounter yourself (in the snow, cold and powder snow, etc.). The design teams make sure the programme for which the product is designed and developed tallies perfectly with its real-world use.
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 72% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
Material
Recycled polyamide
Product made from 11% recycled polyamide
Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 38%.