Long-Sleeved Cycling Base Layer Racer - Carbon Grey
Store Availability
Store availability
BENEFITS
Moisture management
The fabric effectively wicks away perspiration, keeping you comfortably warm.
Warmth
Thermal barrier that keeps you from chills while cycling.
Stretch
Made from highly elastic material that hugs your body. Slim fit.
TECHNICAL INFORMATIONS
Race range base layer
The Race Road Cycling Winter Base Layer was designed to meet the riders' needs during high-intensity winter rides. The major feature of this base layer is its ability to limit perspiration and overheating the body. There are micro-perforations over all warm areas to ensure perspiration wicking in the form of water vapour, thus preventing the fabric from getting soaked with sweat.
Plus, its polyamide composition limits odours.
Directions for use
It's tricky giving advice on cold-weather clothing because it depends on how sensitive you are to the cold.
However, there are two bits of advice that apply to everyone:
- don't wear too many layers as you'll lose the benefit of your warm clothing, plus you'll be uncomfortable.
- when road cycling or mountain biking, you should always be a bit cold to begin with. You'll soon warm up when you've been pedalling for a few minutes, so starting a bit cold will be comfier in the long run.
The perfect combo
Most people find that a base layer under a winter jacket is what they need. It protects you from the cold when exercising, while also letting perspiration escape.
If you tend to feel the cold, you could also wear a long-sleeved jersey, but this will stop perspiration escaping. Instead, try different thicknesses of jacket, even if it means owning two of them.
Essential, Training and Race ranges
You'll find 3 levels within our Van Rysel winter cycling base layers range.
Essential: the warmest products for low-intensity effort where you don't need to wick perspiration away or have a high level of temperature regulation.
Training: the perfect balance between warmth and perspiration wicking.
Race: the perfect balance between warmth and breathability. The idea isn't to remove perspiration, but to limit it.
Product tests
Our team of product designers based at the B'Twin Village in Lille is continuously working to make cycling more comfortable for our users. Our obsession is to create products that meet the specific cycling needs of our users and eliminate hindrances to a good cycling experience.
We then test our products in the field, as we are convinced that only by subjecting them to real world conditions, such as those you experience on your bike, can we continuously improve our products
CARE TIPS
Machine wash at 30°C. Synthetic programme. Turn the garment inside out. Use minimal laundry detergent. Do not add softener. Line dry in a warm, ventilated area. Do not tumble dry.Do not dry clean. Do not bleach. Do not place on a heater to dry.
COMPOSITION
composition
Main fabric: 3.0% Elastane, 97.0% Polyamide
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Warranty
1 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 72% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
Process
Dope dyed
Product made from 72% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.