3-PIECE ALUMINIUM FOLDING TRAIL RUNNING POLES
Store Availability
Store availability
BENEFITS
Compact design
Pole size: Folded 110: 37 cm 120: 40 cm 130: 43 cm
Easy dressing
Adjustable wrist strap. Easy to adjust while running.
Lightweight
Weight of 1 pole 110: 173 g 120: 184 g 130: 194 g
Ergonomic grip
Extra comfortable EVA foam handle with high and low grip positions.
Fast acting
Folding & unfolding speed Unfolds - in 2 seconds Folds - in 3 seconds
Robustness
Resistant to impact and the constraints of mountainous conditions.
Content protection
Storage bag provided with poles to prevent humidity and corrosion.
Traction
Tungsten carbide tip: Excellent grip on all types of terrain.
TECHNICAL INFORMATIONS
HOW TO CHOOSE YOUR TRAIL POLES?
Selection criteria: compact design, low weight and wrist comfort. The priority for trail runners is easy storage and fast deployment of the poles to be able to either use them or forget about them while racing, depending on the route. The most compact poles are less than 40 cm long when folded!
Don't hesitate to take hold of them and test them...
HOW TO SELECT YOUR POLE SIZE
To help you find the right size for your poles, you can use the following formula:Your height in centimetres x 0.67
So, if your height is 180 cm, the recommended pole size will be 120 cm
Runner height from 155 to 170 cm = 110 cm poles
Runner height from 171 to 181 cm = 120 cm poles
Runner height over 182 cm = 130 cm poles
Why use trail running poles?
Advantages of trail poles:
A quick-release push-button for rapid folding and unfolding, even when moving.
They help runners save energy during push-off, ensure better balance and stability during technically challenging stretches and can act as stabilisers and shock absorbers on descents to control speed.
What techniques are used when running with trail running poles?
Firstly, using poles when running is a fairly technical exercise and you will need a little training. It's best to anticipate any difficulties and learn to use them before you race!
Also, there are 2 ways of using trail poles, whether descending or ascending: simultaneous or alternating. Which one you choose will depend on the gradient of the slope and the space available for using the poles:
TECHNIQUE FOR RUNNING WITH SIMULTANEOUS TRAIL POLES:
Useful on steep slopes to relieve your thighs by hauling yourself up with your arms or when descending to hold yourself back and give your legs a rest. You can take several strides each time before your poles touch the ground. Try and lean forward and drive your poles into the ground.
TECHNIQUE FOR RUNNING WITH ALTERNATING TRAIL POLES:
The alternating technique is more appropriate when there is less space available and a gentler slope, this technique requires less power and consists in alternating between your right and left legs, with the opposite arm pushing the pole down in front of you and the other arm behind you, in the air. In this case, it's best not to drive the pole too hard into the ground to maintain a better rhythm. Try and take smaller steps for this technique to become more natural.
COMPOSITION
Resistant construction
Tubes: Aluminium
Handle: 100% EVA foam
Wrist strap: 100% polyester
Maintenance tips
These poles need to be properly maintained to ensure that they work properly and to prolong their lifetime.
After use, if water has got inside a pole, take the sections apart and dry them. Clean off any dust and mud with water, or using a soft brush or paintbrush when it is dry.
Once dry, you can reassemble the pole sections. Do not lubricate with oil or grease.
COMPOSITION
composition
Axis: 100.0% Aluminium; Handle: 100.0% Foamed EVA; Strap: 100.0% Polyester
Tips for storage and maintenance
Storage tips
Store your dry trail running poles in the bag provided, in a dry and dark room with some ventilation if possible.
Restrictions on use
Do not use your trail poles in stormy weather!
TESTS AND WARRANTY
Test product
In order to set our threshold levels, we measured the stresses experienced by the poles in the most demanding conditions of use. During the development phase, each model underwent laboratory tests which replicated the stresses (compression, flexing at three points, etc.) right up to the breaking point. We also tested the components separately (tightening power, wrenching, etc.) Finally, these tests are regularly repeated during the production phase to guarantee a consistent level of quality.
Warranty
2 Years
Agree by
Our products are tested by a panel of independent trail runners under the real-life conditions they were designed for. These tests are organised and supervised by a team of engineers dedicated to the task. Our external testers gave these poles a score of 8.2/10