Adult inflatable buoyancy aid belt - BA 50N+ EIF PFD

Fitting and Inflation

With the belt fastened around your waist, inflate the PFD belt by pulling down on the cord by your right hip (with it worn in front of you). This will immediately inflate it by activating the compressed CO2 cartridge.

Then pass your head through the neck strap and top up the pressure of the bladder by blowing into the tube. If necessary, regularly readjust the belt during your activity

Deflation

Squeeze the air from the bladder by rolling it up towards the tube.

Keep the end of the tube covered using the black cap.

Changing the single-use gas cartridge

Roll up the bladder (from the tube to the pouch)

Make sure that the cartridge remains visible once the bladder is rolled up.

Unscrew the old CO2 cylinder, lift up the inflation lever if necessary

Lower the inflation lever, replace the green indicator, then replace the CO2 cylinder.

Close the pouch fully.



Single-use 15 g cartridge reference : 8555066

Belt weight

Weight = 0.5 kg including cartridge

Waist size

This belt fits a maximum waist size of 122 cm (roughly an XXXL)