Women’s Waterproof Mountain Walking Jacket - MH500 - Raspberry
Store Availability
Store availability
BENEFITS
Anatomic design
Drawcord at the jacket hem adjustable sleeves with good coverage adjustable hood
Lightweight
Only 425 g in size M
Freedom of movement
Stretch fabric (13% elastane), raglan sleeves for freedom of movement
Waterproof
100% taped seams. 3-layer membrane can resist a 25 000 mm water column
Pockets
4 Pockets: 2 hand zip pockets, 2 inside pockets (1 zip, 1 net)
Breathability
30 cm side openings and component that wicks away perspiration (RET=6).
TECHNICAL INFORMATIONS
Cut
This jacket has a fitted cut. The fabric is 13% elastane and the “raglan” sleeves up to the collar give better stretchability and more freedom of movement during your hikes.
A warm layer, such as a fleece or a light padded jacket can be worn underneath.
You can choose your usual size, or a size above if you don't want it to be worn fitted.
Hood
The adjoining hood is adjustable in height and depth thanks to an elastic drawcord. Stiff visor for maximum face protection.
The small detail that makes the difference: a triangular opening on the side of the hood for better visibility to the sides.
Construction of the jacket: 3 layers
This jacket is made up of 3 layers, the best protection there is on the market: the membrane is glued between the inner and outer component layer (hence it being called 3 layers).
The membrane is a kind of very thin polyurethane film that makes the component waterproof while remaining breathable.
It is protected by a mesh, and has the advantage of being softer, lighter, more robust and often more breathable than a coating.
How to look after your jacket
This jacket has taped seams (to ensure perfect waterproofing) which are vulnerable to machine washing and may peel off over time. We therefore recommend using a sponge and water to clean any marks on the jacket, and to machine wash it as little as possible at 30°C, if you want it to use it for trekking for as long as possible.
Waterproofness test
Waterproofing is measured by a fabric’s resistance to water pressure expressed in mm of water column (JIS 1092 standard)
The higher the pressure, the more waterproof the fabric.
The component of this product has a waterproof rating of 25,000 mm, i.e. it can withstand the pressure exerted by a 25,000 mm column of water.
This is also equivalent to 25 000 Schmerbers.
Breathability test
Component breathability is measured by its thermal evaporative resistance (RET).
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little breathability
Our product has a 6 RET rating
How do you restore the water repellent properties of your jacket?
The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use.
All the steps to restore the water-repellent properties are below:
on our website
Recommended additional product
The MH500 over trousers protect the lower half of your body for a complete and effective rain protection system for your mountain outings.
COMPOSITION
composition
Main fabric: 78.0% Polyamide, 22.0% Polyester; Membrane: 100.0% Polyurethane; Pocket: 26.0% Elastane, 74.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Always make sure that this waterproof protective garment is completely dry before storing it.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Morphology (especially thanks to the 3D analysis) Movement sciences Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences + we describe the specific aspects of the test related to the product (e.g. shower, wind tunnel, etc.)
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 29% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.
-
MaterialRecycled polyester
Product made from 4% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.