Women’s ultralight fast hiking shoes FH 900 grey yellow.
Store Availability
Store availability
BENEFITS
Easy opening / closing
Quick, easy lacing that can be adjusted at any time, storage pouch.
Lightweight
Every aspect was optimised to lighten your walks. 300 g per boot in size 6.
Traction
Sole offering an excellent compromise between dry and muddy terrain
Cushioning
Integral EVA cushioning + 2 EVA inserts front and rear for more comfort.
Impact protection
ESS insert on the forefoot to avoid feeling any sharp pebbles
Breathability
Ventilated mesh to eliminate as much perspiration as possible.
TECHNICAL INFORMATIONS
Sole
Sole design that has been the subject of extensive research in our laboratories, combined with a specific rubber formulation to offer a better compromise in terms of grip and traction. The design of the FH900 sole provides more grip than traction. Definition > Traction: not slipping on loose ground (loamy or dry). Grip: not slipping on hard ground (wet or dry).
Buying and fitting advice?
Try on both boots, standing up, with the socks worn for hiking. Try several models and various sizes if necessary. Check two comfort points: the base of the heel and the front part of the foot going down. Avoid all pressure points when trying shoes on. Don't hesitate to walk around the store. Gradually start using you shoes during your first few hiking trips to break them in.
What size should I choose?
For hiking, do not hesitate to buy one size larger than the usual size to guarantee excellent comfort on the descent and to avoid toes rubbing at the tip of the shoe. Tip: keep your toenails short, and before going downhill at any time, check that your laces are tight enough to stop your feet slipping down towards the front of the shoes.
Field tests
All our shoes undergo comfort and use tests carried out by users who are representative of our target market, in conditions identical to those found in typical use. Our Field Test Missions team the product manager up with people who are unaffiliated with Quechua, to test, improve and validate our products.
Lab tests
Further laboratory tests were conducted to test the following elements: attachment of eyelets and webbing, assembly, toxicology, UV resistance, sole and upper component abrasion, accelerated ageing.
How to prevent blisters
Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following:
- Choose a boot in your size (consult the size guide)
- Wear the right type of socks
- Lace up and tighten your boots properly
- When you wear your boots for the first time, keep the outing short
How should you look after your boots?
- Leave to air dry.
- Remove dry mud with a stiff brush.
- For stains, clean with a brush and a little warm water
- Leave to dry
- Spray with a re-waterproofing agent to restore the water-repellent properties of the upper.
COMPOSITION
composition
Outer sole of: 50.0% Ethylene Vinyl Acetate, 50.0% Butadiene Rubber; Upper of: 10.0% Elastane, 40.0% Polyurethane, 50.0% Polyester; Lining and sock of: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
DO NOT TUMBLE DRY.
Storage tips
Store in a well-ventilated dark, dry place.
TESTS AND WARRANTY
Test product
Our design team is based at the foot of Mont Blanc, in Haute-Savoie (France). All year round, we create and develop products that are beautiful, simple and technologically advanced. These are then ruthlessly tested in the field, as we remain convinced that only through rigorous testing under real world conditions, like the ones you will be using them in, can we continue to provide you with better products than ever.
Warranty
2 Years