INFLATABLE WATER POLO PITCH 20 M X 10 M

DIMENSIONS AND ADAPTABILITY

Our field is also ideal for swimming clubs or groups who are looking to mark out a temporary swimming zone.

Our design offers the option of removing the goalposts, leaving just the outer borders. You can still assemble the various components using the straps and buckles. The inner dimensions will then be reduced to 20 metres in length, and 8 metres in width.

DURABILITY

The inflatable parts of our field are made from a TPU bladder surrounded by a Tarpaulin sleeve. (mixture of several layers of PVC and fabric).



This makes the product highly resistant to external factors and ensures the different parts keep their shape.

ASSEMBLY

UNFOLD

Unfold each component of the field on a flat surface.

Inflate each component to a pressure of 7 psi (0.48 bars) using the pump you make and assemble according to the user guide.



FITTING

The field can be attached to the edges of a pool using ropes, or by weighing it down using the 8 weight bags and 8x 5-metre ropes provided.



To weigh it down effectively, fill the bags with stones or sand up to the strap until a weight of 10 kg is reached.

DISASSEMBLY

Separate the weight bags from the field and disassemble the components.



Move each component to a flat surface, fully unscrew the top cap of the valve then partially unscrew the bottom of the valve and allow air to escape for about 1 minute.



PLEASE NOTE: you will hear a very loud noise if you unscrew the bottom of the valve too quickly.

REPAIRS

Our field has been designed so that it can be repaired by the customer. If you notice a puncture on a component, simply open the 2 black zips and remove the bladder to locate the hole.



We supply 12 self-adhesive patches, 3 spare "Boston" valves and a 23 m rope to remove each bladder from its sleeve.