Women's Canyoning Wetsuit Trousers 5 mm - MK 500
Store Availability
Store availability
BENEFITS
Anatomic design
Legs and sides made of 4 mm neoprene and 3 mm Supratex.
Easy dressing
Trousers with braces.
Freedom of movement
Women fitted style for optimal freedom of movement. XS to XL.
Abrasion resistance
Knee and backside reinforcements for superior robustness.
Modularity
You can mix and match sizes for the long johns and jacket.
Warmth
With 5 mm neoprene on the chest, these trousers provide thermal comfort
Pockets
Right leg pocket with drawcord
TECHNICAL INFORMATIONS
Robustness
Knee reinforcements for superior Robustness.
Outer reinforcement patches positioned over sensitive areas.
For a stronger construction, they are bound in areas subject to wear.
Melcro-taped: inner reinforcement of seams in delicate areas
Taped seams with a GBS glued and blind-stitched assembly.
The seams of the suit and hood are waterproof, with a glued and blind-stitched (GBS) assembly: the neoprene is glued first, then stitched for maximum strength (the needle does not completely pass through the neoprene to prevent water infiltration).
Thermal insulation details.
The wetsuit features 5 mm neoprene on the chest.
4 mm on the upper leg, with 3 mm and 2.5 mm Supratex through the rest of the leg.
This multi-thickness construction provides the necessary comfort and ergonomics for canyoning
Tips for looking after your canyoning suit?
1/ After each session, soak the wetsuit in clean water, on the outside and the inside
2/ Use a bactericide solution to sanitise
3/ Rinse thoroughly in clean water
4/ Dry on a wide hanger in a well-ventilated place away from direct light. Keep away from direct sunlight as it can fade the fabric parts of the suit.
What is a wetsuit?
This is the most common type of wetsuit on the market. It is not designed to keep the water out but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside.
Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 mm to 7 mm.
Thanks to their flexibility and modularity, they constitute excellent wetsuits.
Choose your size carefully
When we are in the water, we lose more than half of our body heat through our extremities (feet, hands, head).
In view of this, here are the recommended accessories:
- in warm water and temperate water (>17°C) => 3 mm neoprene low booties.
- in cold water (12°C - 17°C): 3 mm Gloves
- in very cold water (7°C - 12°C): Neoprene jacket, gloves and hood.
Check out our range of accessories on our website
Limitation of water ingress
The ends of the ankles have silicone stoppers that limit water ingress.
They also provide better support when using socks
COMPOSITION
composition
Foam: 100.0% Rubber; Main fabric - Outer layer: 100.0% Polyamide; Main fabric - Inner layer: 100.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry your wetsuit out of the sun and away from any heat sources. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
Restrictions on use
Must be worn with a neoprene jacket. Water < 12°C.
TESTS AND WARRANTY
Warranty
2 Years