Women's Canyoning Jacket 2021 CANYON 5 mm
Store Availability
Store availability
BENEFITS
Anatomic design
4 mm neoprene shoulders and sides. 3mm Supratex sleeves. Hood in 2.5 mm.
Easy opening / closing
Large angled front zip.
Freedom of movement
Unisex fitted cut for optimal freedom of movement. XS to XXL
Abrasion resistance
Elbow and crotch reinforcements for superior.
Modularity
You can mix and match sizes for the long johns and jacket.
Warmth
With 5 mm neoprene on the chest, this jacket provides thermal comfort
TECHNICAL INFORMATIONS
Limitation of water ingress
The ends of the wrists have silicone stoppers that limit water ingress. They also allow better support when using gloves.
Taped seams with a GBS glued and blind-stitched assembly.
The seams of the suit and hood are waterproof, with a glued and blind-stitched (GBS) assembly: the neoprene is glued first, then stitched for maximum strength (the needle does not completely pass through the neoprene to prevent water infiltration).
Thermal comfort details.
The wetsuit features 5 mm neoprene on the chest to guarantee thermal comfort.
4 mm on the sides and shoulders and 3 mm of Supratex on the sleeves, this multi-thickness has the comfort and ergonomics required for a canyoning suit
What is a wetsuit?
This is the most common type of wetsuit on the market. It is not designed to keep the water out but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside.
Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 mm to 7 mm.
As such, they make excellent wetsuits because they are flexible and modular.
Tips for looking after your canyoning suit?
1/ After each session, soak the wetsuit in clean water, on the outside and the inside
2/ Use a bactericide solution to sanitise
3/ Rinse thoroughly in clean water
4/ Dry on a wide hanger in a well-ventilated place away from direct light. Keep away from direct sunlight as it can fade the fabric parts of the suit. The zips can be cleaned with a toothbrush.
Choose your size carefully
To make the most of the features of your wetsuit, it is necessary to choose the correct size. A canyoning wetsuit should be a very tight fit and there should be no visible folds. When dry, it is perfectly normal to feel like it is too tight, this discomfort disappears as soon as the wetsuit gets wet. If you choose a wetsuit that is too big, folds will appear, you will experience irritation and thermal insulation will be reduced (letting in water).
Keep warm
When we are in the water, we lose more than half of our body heat through our extremities (feet, hands, head).
In view of this, here are the recommended accessories:
- in warm water and temperate water (>17°C) => 3 mm neoprene low booties.
- in cold water (12°C - 17°C): 3 mm Gloves
- in very cold water (7°C - 12°C): Neoprene jacket, gloves and hood.
Find our entire range of accessories on our website
COMPOSITION
composition
Foam: 100.0% Rubber; Main fabric - Outer layer: 100.0% Polyamide; Main fabric - Inner layer: 100.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry your wetsuit out of the sun and away from any heat sources. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
Restrictions on use
Use in combination with neoprene long johns. Water <12°C.
TESTS AND WARRANTY
Warranty
2 Years