Inflating & deflating the Stand-Up Paddleboard
INFLATION
To inflate your SUP, check that the valve is in the raised position (closed), so that air does not escape.
Connect the pump.
Inflate to 17 psi for best results.
Disconnect the pump and close the outer plug.
DEFLATION
To deflate your SUP, push the valve in firmly, the air will escape.
Roll, starting from the opposite side to the valve to remove all the air for tight folding.
Maintenance tool
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided.
If necessary, it is possible to change the valve, please consult the workshop of your Decathlon store.
Technical dimensions
INFLATED SUP:
Length: 12'6 (381 cm)
Width: 26" (66 cm)
Thickness: 6" (15 cm)
Volume: 270 litres
Weight: 11.7 kg (+/- 10%)
BAG CONTAINING THE FOLDED SUP:
Height: 80 cm
Width: 45 cm
Thickness: 30 cm
Weight in use
This SUP board was designed and optimised for intermediate paddlers between 60 kg and 80 kg for good speed/stability balance.
However, stability is a notion relative to one’s level and the conditions (flat water, sea, river, etc.). The weight is thus illustrative. Don't hesitate to ask to try out the product.
For one person. the maximum recommended weight is 110 kg.
Repair
We have a stand-up paddleboard repair kit, reference 8512384.We recommend that you contact the workshop of your local store for all repairs.
Fin
Available through customer service and online in the event of breakage or loss.
You can also upgrade your product with a SUP carbon racing fin reference 8545438
Accessories
Included with the boards:
- one carry bag
- one 10' twisted leash
- one USBOX-compatible fin
- two repair patches
- one user manual
- one valve spanner
The paddle and pump are not included. You are invited to visit our web site pages to choose the right equipment